The SPAX-typical T-STAR plus drive is a so-called hexalobular socket. This shape increases the contact surface of our T-STAR plus and the T-STAR plus bits sit perfectly in the screw head. The best possible power transmission from screwdriver to screw thanks to T-STAR plus enables you to work quickly and much more efficiently than with all other drives.

Where the countersunk head screw has a flat design for flush countersinking of the screws, the raised countersunk head has a convex rounding. Depending on the screw type and surface finish (stainless steel, nickel-plated, antique), these screws become a decorative element in furniture construction or when fastening skirting boards, for example.

The fixing thread consists of a main thread, which is inserted into the substructure, and the underhead thread. This underhead thread ensures that the cover board is held securely on the substructure under all weather conditions. The smooth shaft between the threaded parts absorbs the movements of the plank. You will never again have to re-screw wooden floorboards because they come loose or creak too much!

The term 4CUT stands for the square shape of the screw tip. These edges displace the wood fibres during screwing and create space for the core diameter of the screw. The expansion pressure exerted by the core in the wood is thus reduced and splitting of the wood near the edge is prevented. The required torque of the cordless screwdriver is also reduced, as the core of the screw does not have to "squeeze" into the wood.

The abbreviation A2 for our stainless steel screws comes from the alloy of the steel. A2 stainless steel screws offer high protection against corrosion and medium strength. Their resistance to seawater and acids is low. They are therefore used outdoors in areas far from the coast.