Best affordable PC cases
This page always stays fresh and updates automatically.
1. Montech Xr
The XR from Montech is a midi tower with a very elegant front I/O together with a design that resembles wood grain. It is also optimised for airflow and comes with a total of three integrated, powerful ARGB PWM fans ex works. With this, the manufacturer sets the basis for every gaming computer that focusses on cooling performance. The case consists of a sturdy steel construction with a tempered glass side panel and front. The lid, the side of the power supply compartment and the rear side panel are fitted with a fine mesh. The high air permeability benefits the cooling of your components.
Both advocates of air cooling and water cooling enthusiasts will get their money's worth with this case: the Montech XR offers options for installing a total of nine fans. Instead of on the front, two powerful 120 mm fans are pre-installed on the side. Three 120 mm fans can be installed on the lower power supply cover. A 120 mm fan is also pre-installed at the rear. All three of the Montech fans can be controlled via PWM signal and have ARGB lighting. Three 120 mm or two 140 mm fans can be retrofitted in the lid. The height of the CPU cooler is limited to a maximum of 175 mm.
Montech has also made provisions for fans of AiOs or custom water cooling systems. Up to 240 mm radiators can be mounted on the side. There is space on the lid for a radiator up to 360 mm in size. Thanks to the generous mesh surfaces, plenty of air can get in and out of the housing. To ensure the long-term effectiveness of your cooling and simplify the cleaning of your fans, additional dust filters are attached to the side and base. You can easily remove, clean and replace them.
The interior offers an exceptional amount of space for powerful hardware, for example for ATX mainboards and high-performance gaming graphics cards up to 420 mm in length. The graphics card can also be installed vertically using the optional PCI bracket from Montech. Two 2.5-inch SSDs can be attached to the rear of the mainboard tray in the corresponding brackets.
What our customers think
Pro
- 3 included 120mm ARGB PWM fans (daisy chain possible)
- USB - C connection
- Pre-installed fans
2. Deepcool CG530 4F
Experience the ultimate showcase build with its pillarless design. Featuring a seamless, non A-pillar construction, the CG530 4F boasts both a tempered glass side panel and a glass front panel, providing a crystal-clear view of components into full display, turning it into a true work of art.
What our customers think
Pro
- Plenty of space
- General quality
- RGB module included
Contra
- Actually none :)
- No fans
- No negative
3. Deepcool CG530
The DeepCool CG530 is a mid-tower case suitable for a variety of motherboard form factors, including Micro ATX, ATX, and ITX. With its sleek black finish and two tempered glass panels, it not only offers an appealing aesthetic but also provides an excellent view of the internal hardware. The dual-chamber configuration ensures efficient airflow and an organized arrangement of components. The case is equipped with seven expansion slots, allowing for flexible customization and upgrades. Additionally, two USB 3.0 ports and an audio jack are integrated into the front for easy access to essential connections. The CG530 combines functionality and design, making it an excellent choice for PC enthusiasts who value an attractive presentation of their hardware.
- Dual-chamber configuration for improved airflow
- Two tempered glass panels for an appealing view of the hardware
- Supports various motherboard form factors (Micro ATX, ATX, ITX)
- Integrated USB 3.0 ports for quick access to external devices.
What our customers think
Pro
- Plenty of space
- Housing quality
- RGB which are also adjustable via software
Contra
- Actually none :)
- No fans
- No negative
4. be quiet! Pure Base 600
The particularly user-friendly features and whisper-quiet operation allow for nearly any custom system configuration for ATX or Micro ATX PCs. Extremely versatile thanks to adjustable HDD slots and a removable ODD cage.
The Pure Base 600 offers numerous options for selecting system components. The three HDD slots are adjustable, allowing for the installation of very large graphics cards. The removable ODD cage also provides maximum flexibility for installing drives and radiators.
The Pure Base 600 is the perfect case for radiator installation. There are three specifically designated mounting points: front, rear, and top. All radiators up to a size of 360 mm can be installed.
The top cover of the Pure Base 600 is adjustable and allows for various settings: closed for absolute quiet operation, half-open for better airflow, or completely removed to install a radiator.
Two pre-installed Pure Wings 2 fans at the rear and front are equipped with nine airflow-optimized fan blades that reduce noise-causing turbulence and increase air pressure. Up to four additional case fans can be installed.
The integrated 3-stage fan control supports up to three fans. Sound-dampening materials on the top, front, and sides reduce vibrations. The filters at the front and bottom prevent dust from entering the case.
What our customers think
Pro
- 2 very quiet fans already included
- Has enough space for upgrades
- Two pre-installed 3-pin Silent Wings 2 fans.
Contra
- The screws supplied were too large to mount the SSD card.
- You can turn the threads through
- SSD slot too small ?! Samsung doesn't fit in...
5. be quiet! Pure Base 501
The be quiet! Pure Base 501 Airflow Black mid-tower computer case is made of matt black steel and offers a robust build quality as well as impact resistance to protect the internal components. Two pre-installed 140 mm Pure Wings fans provide efficient cooling, while up to six fans in total are supported for optimal airflow. Storage options include two 3.5-inch drive bays and five 2.5-inch SSD bays, providing ample space for games and files.
Connectivity includes two USB 3.2 Type-A ports and one USB 3.2 Type-C port. An integrated cable management system helps maintain a tidy interior. This case is compatible with standard ATX motherboards but does not support E-ATX motherboards or RGB lighting and focuses on durability and reliable performance for everyday computing needs. The dimensions are 50.0 cm high, 23.2 cm wide and 46.3 cm deep with a weight of 8.5 kg. The sound-insulated design reduces operating noise, while the fine-mesh dust filters are easy to clean. It is possible to mount graphics cards up to 36.9 cm long and CPU coolers up to 19.0 cm high. The front mesh panel design maximises airflow and the tool-free assembly makes it easy to install components. The case is ideal for office and home computers designed for long-lasting and quiet performance.
What our customers think
Pro
- Plenty of space
- Design is simple and timeless (no bling bling)
- With 2 housing fans
6. Montech Air 903 Base
Introducing the Montech AIR 903 series – the ultimate upgrade for PC enthusiasts. It offers outstanding aesthetics, unparalleled airflow, meticulous attention to detail, and exceptional compatibility.
7. Lian-Li A3-mATX Wood Edition
Compact micro-ATX case with wood decor, made of steel and plastic, suitable for micro-ATX or mini-ITX motherboards. It has space for a graphics card with four slots up to 415 mm and is compatible with a 360 mm radiator.
What our customers think
Pro
- Super processed
- There is plenty of room for the latest GPUs
- Great hardware compatibility, yet compact
8. Darkflash Tech Leo
The case features a transparent side panel made of tempered glass and a metal front panel in a mesh style. This allows you to showcase the components depending on the backlighting. This way, your computer will not only operate efficiently but also look great.
9. Phanteks XT Pro
As new hardware releases require more cooling performance and interior space, the XT series was specifically designed for this purpose. It offers an excellent price-performance ratio. The length and width of the case ensure that even the largest graphics cards fit easily, with additional space for cable management. The cooling has been optimized with up to 10 fan positions for 120 mm fans, support for 140 mm fans, and a special cooling module at the top of the case.
What our customers think
Pro
- Rather small for a mid tower case but still enough space for everything
- Enough airflow 4x 140mm fans
- Good quality
Contra
- Kabel Managent could be better but it's not bad
- Internal USB cable a little short
- I/O cables should be longer
10. Fractal Node 304
The Node 304 features a unique modular interior for outstanding configurability.
The Node 304 can accommodate up to six hard drives. Unused mounting brackets can be removed to allow for long graphics cards, additional airflow, or more space for cable organization. Additionally, it is equipped with three hydraulic bearing fans, easily cleanable air filters in all intake openings, and two front USB 3.0 ports.
The Node 304 is equipped with hybrid functionality, making it ideal as a cool file server, a stylish and quiet home theater PC, or a powerful gaming system that highlights minimalist and stunning Scandinavian design along with maximum functionality.
What our customers think
Pro
- Good workmanship
- Very well cooled and pleasantly quiet (adjustable)
- 6 spaces for hard drives
Product order
See all products