Best RS PRO products in the Buttons + Switches category
On this page you'll find a ranking of the best RS PRO products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. RS PRO Pedal footswitch
Contact arrangement: 1-pole on/off switch, normally open contact. Switching sequence: Push-button. Housing material: Mild steel. Rated contact voltage AC: 250V. Nominal contact voltage DC: 30V. Rated contact current: 3A at 250V AC, 3A at 30V DC. Switch application conditions: General applications. IP protection class: IP X2. Contact material: Silver. Height: 28mm. Pedal foot switch with two non-locking foot switches connected in parallel. Rated current: 3A at 250V AC, 30V DC. Features a non-slip base and footrest, ideal for controlling machines with IP40 protection.
2. RS PRO 1-12 Bar Stainless Steel Pressure Switch
Operating pressure min. = 1 bar
Operating pressure max. = 12 bar
Suitable media = liquid
Connection = Whitworth male pipe thread (BSP) 1/4 inch
Type = adjustable
Rated voltage = 250V AC
Connection thread size = 1/4 inch
Manufacturer series = F4
Contact functions = normally closed, normally open
Connection - standard thread = G
Operating temperature min = -25°C
Operating temperature max. = +85°C
IP protection class = IP65
Minimum pressure setting = 0 bar
F4 series - stainless steel. Adjustable stainless steel pressure switches from RS. Available for both hydraulic and pneumatic applications, pressure switches provide an electrical signal when the system reaches a selected pressure. Switch pressure can be adjusted for various set points by simply turning a screw in the center of the pressure switch. Equipped with a mechanical stop to prevent damage from overpressure. Can be mounted in any orientation. Accuracy 4% of set pressure. Fixed hysteresis 10-25% (depending on version). Electrical connection according to DIN 43650.
3. RS PRO IPX7 Double pedal footswitch 2 x SPNO
Contact arrangement: 2 x 1-pole change-over switch, normally open contact
Switching sequence: Keying
Housing material: Thermoplastic
Rated contact voltage AC: 24V
Nominal contact voltage DC: 24V
Rated contact current: 3 A
Switch operating conditions: General applications
IP Protection: IP X7
Contact material: Silver
Height: 42mm
RS waterproof industrial foot switch with double pedal. This series of RS waterproof double-pedal footswitches features a rugged, flat, fiberglass-reinforced plastic housing that provides IPX7 protection against ingress of media, perfect for use in harsh industrial environments. These footswitches are waterproof and allow a wider range of applications in environments where contact with water is likely. Waterproof switch, flat housing, double pedal, NO contacts, straight 2 m cable, protection IPX7.
4. RS PRO Pneumatic Pressure Switch 1 - 16 Bar
Operating pressure min.: 1 bar
Operating pressure max.: 16 bar
Pressure type: Electromechanical
Suitable media: Compressed air, gas, pneumatic
Connection: M12 x 1
Rated voltage: 30V
Connection thread size: M12 x 1
Connection - standard thread: NPT
Operating temperature min.: -10°C
Operating temperature max.: +85°C
IP protection class: IP67
Minimum pressure setting: 1 bar
UL and CSA certified, the 18D pneumatic pressure switch from RS Pro is designed for intrinsically safe operation and features a microswitch with gold-plated contacts. Key features include a high number of switching cycles, vibration resistance up to 15 g, and an assortment of pressure ranges. The temperature range is from 0 °C to +80 °C, and it includes an FKM seal. This product is suitable for neutral, gaseous, and liquid fluids.
5. RS PRO Pneumatic Pressure Switch 1 - 30 Bar
Operating pressure min.: 1 bar
Operating pressure max.: 30 bar
Pressure type: Electromechanical
Suitable media: Gas, liquid, non-flammable, pneumatic
Connection: M12 x 1
Rated voltage: 30V
Connection thread size: M12 x 1
Connection - standard thread: NPT
Operating temperature min.: -10°C
Operating temperature max.: +85°C
IP protection class: IP67
Minimum pressure setting: 1 bar
UL and CSA certified, the 18D pneumatic pressure switch from RS Pro is intrinsically safe to operate and features a microswitch with gold-plated contacts. Key features include a high number of switching cycles, vibration resistance up to 15 g, and a variety of pressure ranges. The temperature range is from 0 °C to +80 °C, and it includes an FKM seal. This product is suitable for neutral, gaseous, and liquid fluids.
6. RS PRO SPDT latching light duty foot switch,3A
Contact arrangement: 1-pole on/off switch, normally open contact
Switching sequence: Latching
Housing material: Mild steel
Rated contact voltage AC: 250V
Nominal contact voltage DC: 30V
Rated contact current: 3 A at 250 V AC, 3 A at 30 V DC
Switch operating conditions: General applications
IP Protection: IP X2
Contact material: Silver
Height: 24mm
Low stress. Two foot switches with metal housing and contacts as single-pole change-over switch. Latching and non-latching versions designed for 250 V AC/30 V DC at 3 A. With non-slip underside and foot support. With 2 m cable. Enclosed up to IP40 or IP67.
7. RS PRO IP67 unguarded standard foot switch
EN60204-1/EN 60947-5-1. RS PRO heavy duty unguarded foot switches. RS PRO rugged heavy duty foot switches are ideal for industrial applications. They are manufactured from die-cast aluminium and have been designed for high performance.
8. RS PRO General purpose foot switch, 2 m cable
Contact arrangement: 1-pole changeover switch
Switching sequence: Keying
Housing material: Stainless steel
Rated contact voltage AC: 250V
Nominal contact voltage DC: 24V
Rated contact current: 3 A
Switch operating conditions: General applications
IP Protection: IP X7
Contact material: Silver
Standards fulfilled: 2014/35/EU, EN 60950
2 meter 3-wire cable, waterproof. Stainless steel foot switch. Small and compact foot switch in a stainless steel housing. Robust, compact, and versatile push-button changeover contacts.
9. RS PRO Switch disconnector in housing 100A 4-pole
Number of poles: 4
Current max: 100 A
Mounting type: DIN rail
Power: 45 kW
Protection class: IP65
Padlock option: Yes
Operating voltage: 690 Vac
Electrical phases: 3
Breaking capacity: 30 kA
Length: 280 mm
Width: 190 mm
Depth: 130 mm
Operating temperature min: -25°C
EN60947. Disconnector with enclosure. High quality series of RS Pro insulator disconnectors with enclosure for use with low voltage switchgear for power distribution, load separation, and motor start/stop. The RS Pro series is available in 3-, 4-, and 6-pole versions and has a rating of up to 90 kW. Due to the interlock cover, the switch can only be removed in the off position. Easy access and removal of the switch. Lockable handles. Flame retardant material. Maximum voltage 750 V. ABS, metal cladding, die-cast aluminum, and stainless steel versions available.
10. RS PRO Single non-latching guarded foot switch
Foot switches with protection in a robust design from RS PRO are ideal for industrial applications. The protective cover provides additional user safety and prevents accidental activation.
