Best Pixel products in the Camera remote controls category
On this page you'll find a ranking of the best Pixel products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Pixel Remote release Wireless RW-221/DC2 Oppilas for Nikon
With the Pixel Wireless Trigger RW-221/DC2, you can trigger your Nikon camera using the Wi-Fi remote control. The range of this station is 100 meters. By using multiple receivers, you can trigger all cameras at the same time on one channel. The receiver is equipped with a standard 1/4" thread, allowing you to attach it to a tripod next to the camera. It can also be easily mounted on the camera using the hot shoe connection.
If you have a different camera, please contact us for a suitable product.
2. Pixel Camera connection cable CB1 for Olympus
This CB1 Pixel Camera connection cable is suitable for Olympus cameras. The connection cable can be swapped with the cables from the Pixel Pawn, Oppilas, and TX-252 series. Use the cable to connect a Miops trigger to your camera as well. The cable does not work with the Pixel TW-283.
Cable length: m
This cable is compatible with the following cameras:
Olympus: E1, E3, E10, E20, E5.
3. Pixel Timer Radio Trigger TC-252/S1 for Sony
With the Pixel Timer Remote Trigger TC-252/S1, you can remotely control your Nikon camera. This remote trigger allows you to set your camera for a single photo, burst mode, or a series of photos (max. 1 second) and shots where you can determine the shutter speed. If your camera supports a long exposure time, you can also press the button on the remote to open the shutter. When you release the trigger button, it will close again. It is also possible to use the TC-252 remote trigger as a timer. This timer can be set between 1 and 59 seconds, with a maximum of 99 photos. The 2 AAA batteries provide a standby time of over three years.
If you have a different camera, please contact us for a suitable product.
4. Pixel Kamera Verbindungskabel DC0 3,5 mm für Nikon
This Pixel camera connection cable DC0 (3.5 mm) is compatible with Nikon cameras. You can replace it with those from the Pixel Pawn, Oppilas, and TX-252 series. Use the cable to connect a Miops trigger to your camera as well. Please note: This cable is not compatible with the Pixel TW-283.
This product is suitable for the following cameras:
Do you have a different camera? Feel free to contact us for a suitable product.
5. Pixel RC-201 remote control Wired Digital camera Press buttons
The Pixel RC-201/DC0 cable is suitable for various Nikon DSLR cameras. This cable can be used to comfortably control a remote camera. It is 110 cm long and easy to connect. Once connected, you can tap the button on the remote. If you press the button all the way down, your camera will take the picture. It is also possible to turn the dial, allowing the camera shutter to remain open so that your camera can securely capture both still images and videos.
If you have a different camera, please contact us for a suitable product.
The DC0 cable is attached to the transmitter and cannot be replaced with another cable.
Camera remote controls
−31%
EUR15,90 was EUR22,90
Pixel RC-201 remote control Wired Digital camera Press buttons
Cable
6. Pixel Timer Remote Control Wireless TW-283/E3 for Canon
The Pixel Timer Remote Control Wireless TW-283/E3 for Canon is a versatile and practical accessory for photographers who want to control their camera from a distance. With a range of over 80 meters, this device allows you to trigger the camera without any physical contact. This is especially useful for long exposures, group photos, or wildlife shots where it's important not to disturb the camera. The remote supports multiple operating modes, enabling flexible handling and adaptation to various shooting situations. Its user-friendly operation and the ability to set timers and continuous shooting make the TW-283/E3 an essential tool for creative photographers.
- Supports five different shooting modes, including single and continuous shooting
- Offers BULB shooting for long exposures with manual control of the shutter speed
- Adjustable timer for delay shooting with a delay of 1 to 59 seconds
- Timer schedule shooting allows programming of up to 99 hours, 59 minutes, and 59 seconds
- Lightweight design with a weight of only 52.6 grams for easy handling.
7. Pixel Wired Remote Trigger RC-201/N3 for Canon
The Pixel RC-201/N3 release cable is suitable for various Canon DSLR cameras. The cable with remote control can be used to operate and trigger a remote camera. The cable is 110 cm long and easy to connect. Once you have connected the devices, you can tap the button on the remote control. If you press the button all the way down, your camera will take the picture. It is also possible to turn the dial, allowing your camera to keep the shutter open.
If you have a different camera, please contact us for a suitable product.
8. Pixel Remote release Wireless RW-221/DC0 Oppilas for Nikon
With the Pixel Wireless Trigger RW-221/DC0, you can remotely trigger your Nikon camera via Wi-Fi. The range of this station is 100 meters. By using multiple receivers, you can trigger these cameras simultaneously on one channel. The receiver is equipped with a standard 1/4" thread, allowing you to attach it to a tripod next to the camera. With the hot shoe connection, it can also be mounted on top of the camera.
If you have a different camera, please contact us for a suitable product.
9. Pixel Wired Remote Trigger RC-201/UC1 for Olympus
The Pixel RC-201/UC1 cable is suitable for various Olympus DSLR cameras. This cable can be used to remotely control a camera with ease. It is 110 cm long and easy to connect. Once connected, you can tap the button on the remote. If you press the button all the way down, your camera will take the picture. It is also possible to turn the dial, allowing the camera shutter to remain open for safely capturing both still images and videos.
If you have a different camera, please contact us for a suitable product.
10. Pixel Radio Flash Trigger Set Pawn TF-364 for Olympus
The Pixel Radio Trigger Set Pawn TF-364 is a wireless remote control for Panasonic and Olympus cameras as well as camera flashes. This system allows you to wirelessly control not only the studio flash but also your camera flash and even your camera itself. The wireless control operates via a radio frequency between the transmitter and receiver. The TF-364 kit supports shutter speeds of up to 1/250s.
The TF-364 is compatible with:
Panasonic: DMC-FZ50, DMC-FZ50K, DMC-FZ50S, DMC-FZ30, DMC-FZ30K, DMC-FZ30S, DMC-FZ20, DMC-FZ150, DMC-FZ20K, DMC-FZ20S, LC-1, L1, L10, G10, G2, G1, GF1, GH1, GH2, G3, Gx1, G5, FZ1000 II, DMC-FZ200.
Leica: DIGILUX2, DIGILUX3.
Olympus: E620, E600, E550, E520, E510, E450, E420, E410, E400, E30, E100, E-PM1, E-M5, E-PL2, E-PL3, E-P3, EP-2, EP-1, SP-590UZ, 570UZ, SP565UZ, SP560UZ, SP550UZ, SP510UZ, SP810UZ, SZ-30MR, SZ-20, SZ-11, XZ-1, E1, E3, E10, E20, E5.
