Best selling Charge controllers from Victron Energy
Here you’ll find the best Charge controllers from Victron Energy. The ranking is based on the best-selling products from this brand within the category. In addition to sales volume, factors such as availability, pricing, and overall customer relevance also influence the order. For each product, we include a short description and the most important highlights from customer reviews, giving you a quick overview of the most popular Victron Energy options. This page always stays fresh and updates automatically.
1. Victron Energy Charge controller SmartSolar MPPT 100/20
A solar charger is powered by solar modules and stores energy in batteries. Using advanced technology, the BlueSolar charge controller maximizes energy harvesting and intelligently directs it to fully charge the batteries in the shortest time possible. The device maintains battery functionality, thereby extending its lifespan. By continuously monitoring the voltage and current output of your solar modules, the BlueSolar MPPT technology ensures that all available energy is extracted from the modules and stored. The advantage is particularly noticeable when the sky is partially cloudy and light intensity is constantly changing. You can remotely control and monitor the extensive features of your BlueSolar MPPT charger and pair it with your smartphone or another device via VictronConnect. When your system is connected to the Victron Remote Management Internet portal, you have full access to your MPPT anytime and from anywhere. Both services are available free of charge. The intelligent load output prevents damage caused by using depleted batteries. You can configure the voltage at which the BlueSolar charge controller disconnects a load to prevent excessive discharge of your batteries. The device attempts to recharge the battery to 100% every day. If this is not possible due to bad weather, it raises the disconnect voltage daily until it is successful.
2. Victron Energy battery balancer
The Victron state-of-charge equalizer balances the charge state of two 12 V batteries connected in series or multiple parallel strings of series-connected batteries. When the charging voltage of a 24 V battery system rises above 27 V, the state-of-charge equalizer activates and compares the voltage of the two series-connected batteries. The equalizer draws a current of up to 1 A from the battery or the parallel-connected batteries with the highest voltage. The resulting difference in charging current then ensures that all batteries align to the same charge state. If necessary, multiple state-of-charge equalizers can be connected in parallel. A 48 V battery bank can be balanced using three state-of-charge equalizers.
3. Victron Energy SmartSolar MPPT
A solar charger is powered by solar modules and stores this energy in batteries. Using the fastest technology, the SmartSolar maximizes this energy collection and directs it intelligently to fully charge the batteries in the shortest time possible. The SmartSolar maintains the functionality of the battery, thereby extending its lifespan. The SmartSolar charge controller can even recharge a deeply discharged battery. It can operate with a battery voltage as low as 0 volts, provided that the cells are not permanently sulfated or otherwise damaged.
4. Victron Energy BlueSolar
The load output disconnects the loads when the battery has been discharged to a predetermined voltage level. Alternatively, an algorithm for intelligent battery management can also be selected. The load output is short-circuit proof. Some loads, particularly inverters, are best connected directly to the battery. The inverter remote control is best connected to the load output. In some cases, a special interface cable may be required.
The BatteryLife algorithm monitors the state of charge of the battery. If necessary, it raises the threshold for disconnecting the load day by day until the energy gained is sufficient to charge the battery to nearly 100%. From this point on, the threshold for disconnecting the load is modulated so that charging to nearly 100% is achieved approximately once a week. Options for displaying data in real-time are available for Apple and Android smartphones, tablets, and other devices.
5. Victron Energy Phoenix Charger
Adaptive four-stage charging characteristic: constant current ("bulk") phase, constant voltage ("absorption") phase, float voltage ("float") phase, storage voltage ("storage") phase The microprocessor-controlled 'adaptive' battery management system of the Phoenix charger can be adapted to different battery types. 'Adaptive' means that the charging characteristic is automatically adapted to the type of battery utilisation. The right amount of charge: adapted constant voltage time In the case of low battery discharge (e.g. a yacht connected to shore power), a short constant voltage phase is selected to prevent overcharging. After a deep discharge, the constant voltage phase is automatically extended to ensure that the battery is fully charged. Preventing damage due to excessive gassing: the battery protection mode In order to shorten the charging time, the highest possible charging current was selected together with a high constant voltage. However, to prevent excessive gassing towards the end of the constant current phase, the Phoenix charger limits the speed of the voltage increase after the gassing voltage has been reached. Less maintenance and ageing when the battery is at rest: storage mode Storage mode is always activated if no discharge has taken place within 24 hours. In storage mode, the charge retention voltage is then reduced to 2.2 V/cell (13.2 V for a 12 V battery) in order to minimise gassing and corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This achieves a kind of equalising charge that prevents electrolyte stratification and sulphation - the two main causes of premature battery failure.
6. Victron Energy BlueSolar MPPT 100/50
MPPT controller with an efficiency of over 98%. Fast MPPT controller for maximum energy yield. Fully programmable charging algorithm. Protection against overheating and short circuits. The algorithm maximizes energy output. Rated PV power, 12 V: 700 W. Rated PV power, 24 V: 1400 W. Especially in overcast conditions, when light intensity is constantly changing, an extremely fast MPPT controller can improve energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. In the case of partial shading, there may be two or more maximum power points (MPP) on the current-voltage curve. Conventional MPPTs tend to lock onto a local MPP, which may not be the optimal MPP. The innovative algorithm of the BlueSolar device maximizes energy yield by locking onto the optimal MPP. Fully programmable charging algorithm as well as eight pre-programmed algorithms that can be selected via a rotary knob. Overheating protection and load reduction at high temperatures. Protection against PV short circuits and PV reverse polarity. PV backflow protection.
7. Victron Energy SmartSolar MPPT 250/70-Tr
The SmartSolar MPPT 250/70-Tr from Victron Energy is a highly advanced charge controller designed for the efficient use of solar energy. With a maximum PV input voltage of 250 V DC and a rated current of 70 A, this controller can support a variety of battery systems with 12, 24, 36, or 48 volts. The innovative technology of the device enables ultra-fast power tracking and automatic detection of the optimal operating point, even in partial shading. This ensures maximum energy yield and increases the efficiency of the entire system. Additionally, the controller is equipped with an integrated Bluetooth module, allowing for easy analysis and configuration via mobile devices. The SmartSolar MPPT 250/70-Tr sets new standards in the industry by achieving an efficiency of up to 99%, making it one of the best options on the market.
- Maximum PV power: 1000 W (12 V), 2000 W (24 V), 4000 W (48 V)
- Integrated Bluetooth module for easy configuration and monitoring
- Ultra-fast power tracking and automatic power point detection
- High efficiency of up to 99%
- Supports parallel operation with other controllers of the same type.
8. Victron Energy BlueSolar PWM-Light 12V 24V 5A Solar Charge Controller
The PWM-Light 12V 24V 5A from Victron Energy is an affordable PWM charge controller specifically designed for lighting control. It offers a variety of configuration options to turn the DC load on or off at the controller. In addition to lighting, other devices such as ventilation or similar can also be controlled cost-effectively with this controller. Please refer to the user manual for detailed configuration options.
9. Victron Energy BlueSolar MPPT 150/60-Tr
MPPT controller with an efficiency of over 98%. Fast MPPT controller for maximum energy yield. Fully programmable charging algorithm. Protection against overheating and short circuits. The algorithm maximizes energy output. Rated PV power, 12 V: 860 W. Rated PV power, 48 V: 3440 W. Especially in overcast conditions, when light intensity is constantly changing, an extremely fast MPPT controller can improve energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. In the case of partial shading, there may be two or more maximum power points on the current-voltage curve. Conventional MPPTs tend to lock onto a local maximum power point, which may not be the optimal point. The innovative algorithm of this device maximizes energy yield by locking onto the optimal point. Fully programmable charging algorithm as well as eight pre-programmed algorithms that can be selected via a rotary knob. Overheating protection and load reduction at high temperatures. Protection against PV short circuits and PV reverse polarity. PV backflow protection.
10. Victron Energy SmartSolar MPPT 75/10
Ultra-fast Maximum Power Point Tracking (MPPT). Detection of the Maximum Power Point even in partial shading. Load output. Flexible charging algorithms. Overheat protection and load reduction at high temperatures. Automatic battery voltage detection and intelligent battery management through load shedding. A solar charger is powered by solar modules and stores this energy in batteries. Using progressive technology, the BlueSolar charge controller maximizes this energy harvesting and directs it intelligently to fully charge the batteries in the shortest time possible. The device maintains the battery's functionality, thereby extending its lifespan. By continuously monitoring the voltage and current output of your solar modules, the BlueSolar MPPT technology ensures that all available energy is extracted from the modules and stored. The advantage is most noticeable when the sky is partially overcast and light intensity is constantly changing. You can control and monitor the extensive features of your BlueSolar MPPT charger remotely: Bluetooth Smart allows setup and monitoring with a smartphone or other Bluetooth-enabled device. When your system is connected to the Victron Remote Management Internet portal, you have full access to your MPPT anytime and from anywhere. Both services are available free of charge.
Product order
See all products