Best Aqua Computer products in the Water cooling monitoring category

On this page you'll find a ranking of the best Aqua Computer products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.

1. Aqua Computer Filter with stainless steel mesh, shut-off valves and installation cover

This filter element from Aqua Computer offers enhanced functionality compared to conventional simple filters. Two integrated stopcocks allow for easy cleaning of the filter without draining the water from the system. The large stainless steel mesh is extremely durable and can be easily removed for cleaning. The acrylic glass cover enables visual inspection of the filter mesh at any time. It features extremely low flow resistance due to its large filter surface. An installation cover for housing installation is included, along with a lighting option through a G1/8 thread on the bottom. 

Aqua Computer Filter with stainless steel mesh, shut-off valves and installation cover
Water cooling monitoring
EUR57,07

Aqua Computer Filter with stainless steel mesh, shut-off valves and installation cover

2. Aqua Computer Aquacomputer connection cable alarm output VISION/OCTO to mainboard power button

This cable from Aquacomputer is used for emergency shutdown of the computer in the event of an alarm. It is compatible with the Vision series and is connected to the power button input of the mainboard without affecting the power button. Scope of delivery: 1x cable (length 70cm) Compatible with the following devices: cuplex kryos NEXT with VISION VISION connection terminal for kryographics (23664, 23665, 23666, 23667) VISION Touch (53232, 53235) OCTO (53286) Note: Before connecting the cable, please make sure that the alarm output/tacho signal output of the corresponding device is configured correctly! Quick guide: Settings for VISION devices (in aquasuite software): Tab "Alarm settings": Selection item "Power button (53216)" must be activated. Only then connect the alarm cable to the mainboard. Then test the correct function by provoking an alarm. If the PC does not switch off, turn the plug on the mainboard 180 degrees and repeat the test. During the emergency shutdown, data may be lost because the operating system and open programmes will not be shut down properly! be terminated properly! 

Aqua Computer Aquacomputer connection cable alarm output VISION/OCTO to mainboard power button
Water cooling monitoring
EUR7,99

Aqua Computer Aquacomputer connection cable alarm output VISION/OCTO to mainboard power button

3. Aqua Computer Flow sensor cable 3 pole

Three-core cable for connecting the flow sensor to the aquaero. Length approximately 30 cm, with connectors on both sides (special connector on sensor). If needed, the cable can be extended with standard 3-pin fan extension cables. 

4. Aqua Computer USB connection cable for VISION, internal

With this USB connection cable, a USB device from Aqua Computer (e.g., VISION) that features a miniature connector can be connected to a free internal USB port (header) on the motherboard. The cable is 100 cm long and comes in a discreet black color, making it very easy to install.

Technical details:
- Color: Black
- Length: 100 cm
- Connectors:
- Miniature connector (USB device from Aqua Computer)
- USB connector (for internal header of a motherboard). 

5. Aqua Computer Passive cooler for aquaero 6, black

Mounting this passive heat sink on an aquaero 6 increases the heat dissipation from the power components and thus increases the output power of the fan ducts. In addition, the water cooler for aquaero 5 (Art. 20023) can be mounted on the passive cooler for active cooling. The passive cooler is also suitable for simultaneous mounting with the Real Time Clock (Art. 70215), but additional mounting material is included with the passive cooler.

Scope of delivery:
Aluminium heat sink for aquaero 6, black anodized
thermal pad
fixing material

Compatible to:
aquaero 6 PRO
aquaero 6 XT

Note: The aquaero 6 and the water cooler are not included in the scope of delivery! If the water cooler is used without a second or narrower elevation (very old variant), washers must be used for installation. 

6. Aqua Computer aquaero power connect 24 pin ATX standby power ATX brea

Note: A connector for the relay output is additionally required for use with the switch output of the aquaero.

7. Aqua Computer VISION Touch with ext. USB cable, IR, temp. measurement

The Aqua Computer VISION Touch is a versatile graphic display specifically designed for monitoring water cooling systems. With a high-resolution OLED display (128 x 64 pixels), it offers excellent image quality and allows for the display of various data in individually configurable formats, including lists, graphs, and charts. The device is equipped with an external USB Type-A interface, enabling easy connection to a PC. Operation is facilitated through four programmable buttons, ensuring user-friendly interaction. The integrated ambient temperature sensor allows for continuous temperature monitoring, and there is the option to configure alarm functions to respond to critical temperature values. The included clip stand provides stable placement for the display, making it ideal for use in various environments.

- OLED display with excellent contrast and viewing angle stability
- Individually configurable display formats for hardware data
- Integrated ambient temperature sensor with alarm function
- User-friendly operation via four programmable buttons
- Convenient clip stand for flexible placement. 

8. Aqua Computer Connection cable for VISION flow sensor

Connection cable for connecting the flow sensor, compatible with control devices of the Vision series.

9. Aqua Computer 53026 Indoor Temperature Sensor Wired Temperature & Humidity Sensor

This temperature sensor features an extremely flat design, allowing it to be easily attached to any surface that needs measurement. The sensor is equipped with a two-pin plug, and the total length, including the sensor and plug, is approximately 70 cm. 

10. Aqua Computer Replacement display for aquaero 5/6 PRO

This is a replacement display for the aquaero 5/6 PRO water cooling controller from aqua computer.

Technical details:
- Manufacturer No.: 53143
- Material: anodized aluminum
- Color: Black
- Compatibility:
- aqua computer aquaero 5 PRO
- aqua computer aquaero 6 PRO. 

See all products