Best selling Lab power supplies
Here's a ranking of the best products in this category. To give you a quick overview, we've also added some key information about the products.
1. Peaktech P 6225 A Switched-mode power supply unit
This laboratory power supply offers a variable DC voltage output of 0 - 30 V or 0 - 5 A. The current and voltage settings are made using digital potentiometers, allowing both values to be adjusted even when the output sockets are turned off. By pressing the respective rotary knob for current or voltage, the setting resolution can be switched from 10 mA to 100 mA or from 10 mV to 1 V. To ensure safe measurement, there is a button on the front of the PeakTech 6225 A that is used to control the output voltage on and off. The display also indicates when the output is active. Another notable feature is the CV (Constant Voltage) and CC (Constant Current) function of the power supply. With this function, the voltages and currents can be set to constant values that do not change when a load is connected. These features make the PeakTech 6225 A an outstanding companion for any hobbyist in electronics, as well as for any specialist.
2. Uni-T LABORATORY POWER SUPPLY UT-P3313-TFL-II
The laboratory power supply UT-P3313-TFL-II is a versatile device designed for the precise generation of constant voltage or electric current. It offers the option to operate in two modes: as a voltage source or as a current source. With an output voltage range of 0 V to 30 V and a maximum starting current of 3 A, this power supply is ideal for various applications in laboratories and technical environments. The high output power of 96 W allows for the operation of a wide range of devices. The precise resolution setting and high adjustment accuracy ensure that the desired parameters are achieved accurately. The device is equipped with an LED display that allows for clear readability of current values. Additionally, the power supply is designed to operate at different mains voltages and features a robust construction suitable for use in demanding environments.
- Two operating modes: constant voltage and constant current
- Adjustment accuracy of < 0.5% for voltage and current
- Response time of less than 100 µs
- LED display for clear readability
- Temperature coefficient of ≤ 300 ppm/°C for high stability.
3. Peaktech P 6210 Linear laboratory power supply
The PeakTech 6210 is a laboratory power supply that features four separate voltage outputs. Two of the voltage outputs can be continuously adjusted using the rotary knobs located on either side of the front panel. The device also has CC and CV functions, which are used to set or display constant currents or voltages. Additionally, there are two push buttons for switching between normal, series, and parallel modes, allowing users to configure the connection type of the independently adjustable outputs. Another notable feature of this device is the two fixed voltage outputs, which provide a voltage of 5V DC and a current of 1A DC. Due to its versatility, the PeakTech 6210 can be optimally used in many areas of electrical engineering.
4. Peaktech P 6227 Switched-mode power supply unit
This newly developed laboratory power supply offers an adjustable 0...60V or 0...6A DC main output with a maximum continuous power of 150W. For developers, this lab power supply offers two switchable USB outputs with their own LCD display with voltage and current values. If you use a load up to 2.5A, you can regulate the output voltage up to 60V. If you want to use a higher current up to 6A, regulate the load to a maximum of 25V. Of course, all levels in between are also adjustable, such as 30V/5A, 40V/3.7A or 50V/3A. The current and voltage setting is also done when the output is switched off. By pressing the rotary knob for current or voltage, the setting resolution can be switched fine/coarse from 1mA to 100mA or 10mV to 1V. Due to the high range of functions and the simple operation with the best price/performance ratio, this laboratory power supply is ideal for the training, hobby, developer and service area.
5. Peaktech P 6080 A Linear laboratory power supply unit
The new PeakTech 6080 A is a linear regulated laboratory power supply with passive cooling and high resolution digital display (1mA and 10mV). This model features coarse/fine control via separate potentiometers for precise selection of current and voltage settings. Due to the linear technology used, this model does not generate any high-frequency interference and a safety transformer in accordance with EN-61558-2-6 has also been used, which outputs a safety extra-low voltage (SELV) to ensure the greatest possible user safety. This power supply unit in modern design has been specially designed for the service and training sector and convinces with its excellent price/performance ratio.
6. Uni-T Laboratory power supply UDP6720
Uni-T UDP6720 laboratory power supply unit.
7. Statron Laboratory power supply unit, adjustable 22
Multi-voltage source for universal use. Output voltages can be connected in series and parallel. For precise adjustment of the output data, 10-turn potentiometers are installed. The design as a linear regulator ensures low residual ripple and interference voltages. All outputs can be used simultaneously.
8. Voltcraft Linear laboratory power supply unit
Electronically stabilized laboratory power supply unit with separate voltage and current regulators. The current limitation can be preset without a short-circuit bridge at the output. The LPS series is actively ventilated.
9. Voltcraft Laboratory power supply, adjustable PP
The PPS series laboratory power supply serves as a potential-free DC voltage source for operating low-voltage consumers. The adjustable output can be accessed from the front up to a maximum of 5 A and from the rear up to the full rated current (1 - 18 V/DC / 0 - 10 A). Connections are made at the front via 4 mm safety sockets and at the rear via high-current screw terminal sockets. Voltage and current settings are made continuously using digital rotary controls with coarse and fine adjustments to allow for quick and precise value settings. The values are displayed on a clear display. The current limit for constant current operation can be preset without a short-circuit bridge. Three freely programmable memory slots can be assigned different fixed voltages and current limits. Additionally, the power supply can be controlled via the included software and USB connection for operating cyclical processes through a PC. Up to 20 programmable voltage and current sets with varying durations can be programmed for operation. The cyclical processes can be repeated up to 999 times. Special feature: programmable.
10. Statron Laboratory power supply unit, adjustable 3252.1 0 - 3
Linear laboratory power supply with separate digital displays for voltage and current. Its robust design, ease of use, and good regulation make it ideal for laboratories, workshops, and manufacturing.
Product order
See all products