100mm

The ARCTIC W1A monitor wall mount is suitable for monitors up to 43 inches and supports a maximum load of 20 kg. The Samsung G3 Odyssey 27 inch monitor should be compatible as it is within these size and weight limits. However, it is important to check the VESA mounting requirements of the monitor to ensure that it is compatible with the mount. The W1A supports 100 x 100 mm and 75 x 75 mm VESA mounts.

The hole spacing is approx. 88mm.

ja.

No, the Arctic W1A 30" wall mount is only suitable for monitors up to 30". Since the Samsung Odyssey G9 LC49G95TSSRXEN has a VESA 100 x 100mm mount, we recommend this version. Arctic W1C (Wall, 49 ")

Hello The wall bracket fits your 23" display. The hole spacing is the same from 13" to 30", as described in the description.

I have attached a 34" with it, I think it should work without problems.

Yes, screws and dowels were included.

Yes, if your screen has 4 screws in a square pattern on the back. The mount is quite solid.

Yes

ja

If the monitor has a VESA mount with 75x75mm or 100x100mm, there is nothing to stop it. This is not specified for the monitor here on digitec, or I have overlooked it. In any case, this would not be a problem in terms of weight. The mount is top, I have used three of them in the meantime 😃

Yes.

Minimum 10cm between the wall and the back of the screen

Yes, this wall bracket is compatible with the monitor mentioned.

Yes, it should work. The monitor weighs 8.6kg and the maximum payload of the wall mount is 20kg. The wall mount is designed for VESA 100x100mm & 75x75mm. The monitor has a VESA 100x100mm.

yes,

For installation in a solid wall (with plastic pegs), an 8mm drill bit is required. See info here: http://support.arctic.ac/index.php?p=w1a&lang=de

Currently in the process of moving, I can't give you an exact answer, but I would say between 8-10 cm

As long as the TV does not weigh more than 20 kg, this should be possible. However, I would first check that the TV has the appropriate device to be attached to the wall bracket.

Hi, Your screen weight is 9kg and the support can handle up to 20kg. I think it will work (if you can match the support with the screen). Best Regards, N. Oliveira

ja

Both monitors have the VESA 100mm x 100mm standard for the wall mount. The Arctiv supports Vesa 75mm x 75mm. So, you can use the Arctic W1A for both monitors.