Best selling Actuators from Eaton
This page always stays fresh and updates automatically.
1. Eaton Power Quality Smart Home xComfort radio blind actuator
Eaton UP Shutter Actuator CJAU-01/02
Manufacturer: Eaton
Designation: UP Shutter Actuator
Type: CJAU-01/02
KNX Bus System: No
KNX Radio Bus System: No
Radio Bus System: Yes
LON Bus System: No
Powernet Bus System: No
Other Bus Systems: xComfort Radio Bidirectional: Yes
Mounting Type: Flush-mounted
Width in Division Units: 3
With Bus Coupling: Yes
Bus Module Removable: Yes
Local/Manual Operation: Yes
With LED Display: No
Ohmic Switching Current: 6 A
Max. Switching Power: 1380 W
Max. Number of Shutter Outputs: 1
Switching Function: No
Type of Current: AC
Protection Class (IP): IP20
Min. Depth of Device Box: 26 mm
The shutter actuator receives and controls roller shutters and blind drives with 230V motors that have integrated limit switches. This shutter actuator also allows for two safety functions (e.g., safety position in case of wind and/or rain, anti-lockout protection - if the patio door is open, this roller shutter/blind must not close). Note: Multiple shading motors must not be connected in parallel to a shutter actuator without a separating relay. Power is supplied via the mains. The device is installed in switch or junction boxes. When used with inductive loads (e.g., fluorescent lamps), be sure to observe protective circuitry.
2. Eaton Power Quality Smart Home xComfort radio switch actuator all-pole (240659)
There is someone who is always there for you: who closes the shutters in the evening and retracts the awning in case of a storm warning. Who adjusts the heating to a comfortable temperature before you come home. Who skillfully sets the lighting, prevents electromagnetic pollution, and cuts off power to standby devices. The intelligent xComfort building automation system turns your home into a comfortable energy-saving building.
Actuator
EUR129,–
Eaton Power Quality Smart Home xComfort radio switch actuator all-pole (240659)
Switch actuator
3. Eaton Analog actuator 0-10 VDC
The analog actuator receives a signal, switches a relay, and provides an output voltage of 0 to 10 VDC for devices such as mixers, heating systems, ventilation, dimmers, etc. It is powered via the mains. The device can be installed in a junction box, suspended ceiling, or directly in the devices to be controlled.
4. Eaton CSAU-01/04: UP-switching clock. pot.free / keym.
Eaton Switch Actuator Potential-Free CSAU-01/04
Manufacturer: Eaton
Description: Potential-free switch actuator 8A 230V AC
Type: CSAU-01/04
KNX Bus System: no
KNX Wireless Bus System: no
Wireless Bus System: yes
LON Bus System: no
Powernet Bus System: no
Other Bus Systems: xComfort Wireless bidirectional: yes
Mounting Type: Flush-mounted
Width in Division Units: 3
Local/Manual Operation: yes
With LED Display: no
Max. Switching Power: 1840 W
Max. Switching Power LED: 0 W
Output Power: 1840 W
Suitable for C-Load: no
Max. Number of Switching Outputs: 1
Max. Switching Current: 8 A
Rated Current: 0 A
Rated Operating Voltage: 0 V
Different Phases Connectable: no
With Bus Coupling: yes
Bus Module Removable: yes
Min. Depth of Device Box: 26 mm
Modular Expansion Option: no
Protection Class (IP): IP20
The potential-free switch actuator with push-button function receives and switches devices such as doorbells. The special feature of this product is that in Basic Mode, only the push-button function is used. The output is switched on as long as the assigned button/sensor is pressed (function of a doorbell button). Even when resetting to the factory state (Reset) and reassigning a button/sensor in Basic Mode, only the push-button function is available. In Comfort Mode, all known and proven functions remain unchanged. Power is supplied via the mains. Other voltages besides the mains voltage can also be switched. The device is installed in a switch, junction, installation box, or directly in the lamp cover.
EAN: 4015081189106.
Actuator
−5%
EUR112,55 was EUR119,–
Eaton CSAU-01/04: UP-switching clock. pot.free / keym.
Switch actuator
5. Eaton HEATING ACTUATOR 16A, EMS (CHAU-01/01-16E)
Eaton Heating Actuator CHAU-01/01-16E
Manufacturer: Eaton
Designation: Heating Actuator 16A
Type: CHAU-01/01-16E
Bus System KNX: No
Bus System KNX Wireless: No
Bus System Wireless Bus: Yes
Bus System LON: No
Bus System Powernet: No
Other Bus Systems: Other bidirectional wireless: Yes
Mounting Type: Flush-mounted
Width in Divisions: 3
With Bus Coupling: Yes
Bus Module Removable: No
Continuous Setpoint: Yes
Switching Setpoint: No
Valve Protection Function: No
Manual Switching: No
Max. Switching Current (ohmic load): 16 A
Number of Outputs: 1
Max. Output Current: 16 A
Output Current: 16 A
Switching Voltage: 196 to 253 V
Protection Class (IP): IP20
Min. Depth of Device Box: 40 mm
Additional Details:
The 16A heating actuator is suitable for all electric heating cables, films, and heating plates. Compact design for installation behind sockets or in junction boxes. It operates in combination with wireless temperature sensors or a smart device (Smart Home Controller). Easy selection of heating type with heating profiles. Hybrid switching technology (long lifespan) for high switching performance. PWM-based heating control. Integrated energy measurement. Supports wireless floor temperature sensor for overheating protection. Emergency operation mode in case of temperature sensor failure. Energy-efficient.
6. Eaton Electric GmbH Binary input UP 2x230VAC CBEU-02/03
There is someone who is always there for you: who closes the shutters in the evening and retracts the awning in case of a storm warning. Who adjusts the heating to a comfortable temperature before you come home. Who skillfully sets the lighting, prevents electromagnetic pollution, and cuts off power to standby devices. The intelligent xComfort building automation system transforms your home into a comfortable energy-saving building.
7. Eaton xComfort radio switching actuator, radio wall push-button CPAD-00/215
Pre-configured wireless switch package to extend a traditional switch with a second wireless switch. Controls all types of loads. Hybrid switching technology for long lifespan. Easy installation without major construction work. Wireless push button wherever you want. Compatible with universal 55 mm switch systems.
Actuator
EUR156,59
Eaton xComfort radio switching actuator, radio wall push-button CPAD-00/215
Switch actuator
8. Eaton 194372
Eaton Heating Actuator CHAU-01/01-10E
Manufacturer: Eaton
Designation: Heating Actuator 10A
Type: CHAU-01/01-10E
Bus System KNX: No
Bus System KNX Wireless: No
Bus System Wireless Bus: Yes
Bus System LON: No
Bus System Powernet: No
Other Bus Systems: Other bidirectional wireless: Yes
Mounting Type: Flush-mounted
Width in Divisions: 3
With Bus Coupling: Yes
Bus Module Removable: No
Continuous Setpoint: Yes
Switching Setpoint: No
Valve Protection Function: No
Manual Switching: No
Max. Switching Current (resistive load): 10 A
Number of Outputs: 1
Max. Output Current: 10 A
Switching Voltage: 196 to 253 V
Protection Class (IP): IP20
Min. Depth of Device Box: 40 mm
Additional Details: The 10A heating actuator is suitable for all electric heating cables, films, and panels. It features a compact design that allows installation behind sockets or in junction boxes. It operates in conjunction with wireless temperature sensors or a smart device (Smart Home Controller). The actuator enables easy selection of heating types with heating profiles. It utilizes hybrid switching technology for high switching performance and long lifespan. The actuator includes a PWM-based heating control and integrated energy measurement. It supports a wireless floor temperature sensor for overheating protection and has an emergency operation mode in case of temperature sensor failure. It is energy-efficient.
9. Eaton Flush-mounted switching actuator-potential-free
Eaton Wireless Switching Actuator 1f. CSAU-01/02
Manufacturer: Eaton
Designation: Wireless Switching Actuator 1f. potential-free
Type: CSAU-01/02
KNX Bus System: no
KNX Wireless Bus System: no
Wireless Bus System: yes
LON Bus System: no
Powernet Bus System: no
Other Bus Systems: xComfort
Bidirectional Wireless: yes
Mounting Type: Flush-mounted
Width in Division Units: 3
Local/Manual Operation: no
With LED Display: no
Max. Switching Power: 1840 W
Max. Switching Power LED: 0 W
Output Power: 0 W
Suitable for C-Load: no
Max. Number of Switching Outputs: 1
Max. Switching Current: 8 A
Rated Current: 8 A
Rated Operating Voltage: 230 V
Different Phases Connectable: no
Power Consumption: 0.6 W
With Bus Coupling: no
Bus Module Removable: yes
Min. Depth of Device Box: 26 mm
Modular Expansion Option: no
Protection Class (IP): IP20
The "potential-free" switching actuator receives and switches various devices such as ventilation, heating, alarm systems, etc. The power supply is provided via the mains. Other voltages besides the mains voltage can also be switched. The device is installed in the switch, junction, installation box, or directly in the lamp cover.
10. Eaton Smart dimming actuator, R/L/C/LED, 0-500W, 182448
Intelligent dimmer actuator 0-500 W/230 VAC with local 230 VAC inputs. Suitable for dimming a variety of loads, including dimmable and non-dimmable LEDs (On/Off). Dims even the smallest LED load starting from 0 W! Easy selection or definition of a DIM profile for optimal dimming performance. Energy efficient. Short circuit, overload, and overheating protection with automatic recovery. The device can be installed in a junction box or directly in the ceiling.
Product order
See all products