Best selling Energy monitors from ABB
On this page you’ll find a ranking of the best Energy monitors from ABB. To give you a quick overview, we’ve added the most important product details. This page always stays fresh and updates automatically.
1. ABB Alternating current meter B23 212-100 Bronze
ABB Stotz S&J Three-Phase Meter B23 212-100
Manufacturer: ABB Stotz S&J
Designation: Three-Phase Meter Direct Connection 65A
Type: B23 212-100
Meter Type: electronic
Rated Current (In): 65 A
Maximum Current (Imax): 65 A
Rated Voltage (Un) N-L: 220..240 V
Rated Voltage (Un) L-L: 380..415 V
Frequency: 50..60 Hz
Accuracy Class: B
Polarity: Four-Wire
Design: Direct Measurement
Energy Type: Active and Reactive Power
Suitable for: Consumption/Supply
Tariff Design: Single Tariff
Load Profile Measurement: no
Reverse Flow Prevention: yes
Calibrated: yes
Approval: Measuring Instruments Directive
Pulse Output: electrical
Pulse Type: S0
Pulse Rate: 1..999999 Imp/kWh (kvarh)
Display Type: digital
Mounting Type: REG
Width in Division Units: 4
Width: 70 mm
Depth: 65 mm
Height: 26.5 mm
Interface Design: other
EDL40 Signature: no
With Lock Code: no
Number of Digits: 7
Protection Class (IP): IP20
Protection Class (NEMA): other
ABB Stotz S&J Three-Phase Meter B23 212-100: additional details
Three-phase meter for measuring a three-wire or four-wire three-phase network via a direct connection up to a maximum of 65 A. The following values are displayed on a white backlit display with up to 7 digits: active energy (Class 1) and reactive energy (Class 2) for import and export, power, currents, voltages (L-L, L-N), frequency, cos phi, power factor, and apparent power, both per phase and total. Communication can occur via the integrated RS485 interface (Modbus RTU) or through the infrared interface for connecting a KNX module. The energy meter has a pulse output. The meter is calibrated according to MID and approved according to IEC. The installation width is 4 DIN modules.
2. ABB XR-1-CONNECTION.3PH
3. ABB Operating hours counter DRB7 E233-230
Operating hour counters are used to record operating times, determine idle times, and track downtime of machines and equipment, for commercial purposes or in home installations. Without reset function.
Type: E233-230
Operating hour counter HMT, E233 operating hour counter.
4. ABB EM/S3.16.1 Energy module, EM/S3.16.1 3F, 16/20A, REG
The energy module is used to measure energy consumption and various electrical parameters in the final circuit. Active power, current, voltage, and frequency can be monitored through threshold values, and load peaks can be limited through simple load control. The recorded values are made available via ABB i-bus KNX.
Type: EM/S3.16.1
Energy modules and actuators energy meters.
5. ABB A41 412-100 AC meter, RS485 2CMA170505R1000
ABB Stotz S&J AC Meter A41 313-100
Manufacturer: ABB Stotz S&J
Designation: AC Meter M-Bus
Type: A41 313-100
Meter Type: electronic
Rated Current (In): 80 A
Maximum Current (Imax): 80 A
Rated Voltage (Un) N-L: 57.7..288 V
Frequency: 50..60 Hz
Accuracy Class: B
Phase Type: single-phase
Design: direct measurement
Energy Type: active and reactive power
Suitable for: consumption/supply
Tariff Design: multi-tariff
Tariff Control: external
Load Profile Measurement: no
Reverse Flow Prevention: yes
Calibrated: yes
Approval: Measuring Instruments Directive
Pulse Output: electrical
Pulse Type: S0
Pulse Rate: 1..999999 pulses/kWh (kvarh)
Display Type: digital
Mounting Type: REG
Width in Division Units: 4
Width: 70 mm
Depth: 65 mm
Height: 26.5 mm
Interface Design: M-Bus
EDL40 Signature: no
With Lock Code: no
Number of Digits: 7
Protection Class (IP): IP20
Protection Class (NEMA): other
The A41 313-100 AC meter measures single-phase networks via a direct connection for currents up to a maximum of 80 A. A backlit display shows up to seven-digit values: active energy (Class 1) and reactive energy (Class 2) for import and export, power, current, voltage (L-N), frequency, cos phi, power factor, and apparent power. Communication can occur via the integrated M-Bus or infrared interface for connecting a KNX module. The energy meter has two fixed-configured inputs and outputs. The output can serve as either a pulse output or an alarm output, with up to 25 alarm values (thresholds with time delay) configurable. The inputs are used for tariff control or counting external pulses. The resettable intermediate meter allows for measuring individual intervals and records up to four tariffs. The integrated clock enables time-controlled functions. Calibration according to MID and approval according to IEC. The installation width is 4 DIN modules.
6. ABB M4M 20 MODBUS
The ABB M4M 20 MODBUS is a state-of-the-art energy measuring device specifically designed for the precise analysis of electrical networks. With a compact design of 96 mm x 96 mm, it is ideal for single-point installation in various applications. The device supports a nominal voltage of 400 volts and is rated for a maximum current of 6 amperes. It features a digital display and is equipped with an IP54 protection rating, safeguarding it against dust and splashes. The operating temperature ranges from -25 °C to +70 °C, allowing for versatile use in different environments. The integrated Modbus RTU interface and Bluetooth connectivity facilitate easy integration into existing systems and enable efficient data transmission. The M4M 20 MODBUS is therefore a reliable solution for monitoring and analyzing energy consumption and quality.
- Two digital outputs for flexible control options
- Supports Modbus RTU for easy system integration
- Operating temperature range from -25 °C to +70 °C
- IP54 protection rating for increased resistance to environmental influences.
7. ABB A43 312-100 A43 312-100 Three-phase counter, RS-485 A43 312-100
Three-phase meter for measuring a three-wire or four-wire three-phase network via a direct connection up to a maximum of 80 A. The following values are displayed on a backlit display with up to 7 digits: active energy (Class 1) and reactive energy (Class 2) for import and export, power, currents, voltages (L-L, L-N), frequency, cos phi, power factor, and apparent power, both per phase and in total. Communication can occur via the integrated RS485 interface (Modbus RTU) or through the infrared interface. The energy meter has 2 fixed-configured inputs and outputs. The output can be used either as a pulse output or as an alarm output, with up to 25 alarm values that can be set. The inputs are used for controlling tariffs or counting external pulses. The resettable intermediate meter allows for measuring individual intervals. Additionally, the meter can record up to 4 tariffs. The meter is calibrated according to MID and approved according to IEC. The installation width is 7 DIN modules.
8. ABB Transformer Meter B24 212-100 Bronze
ABB Stotz S&J Measuring Transformer Meter B24 212-100
Manufacturer: ABB Stotz S&J
Designation: Measuring Transformer Meter RS485
Type: B24 212-100
Meter Type: electronic
Rated Current (In): 6 A
Maximum Current (Imax): 6 A
Rated Voltage (Un) N-L: 230..240 V
Rated Voltage (Un) L-L: 380..415 V
Frequency: 50..60 Hz
Accuracy Class: B
Connection Type: Four-wire
Design: Measuring Transformer
Energy Type: Active and Reactive Power
Suitable for: Consumption/Supply
Tariff Design: Single Tariff
Load Profile Measurement: no
Reverse Lock: yes
Calibrated: yes
Approval: Measuring Instruments Directive
Pulse Output: electrical
Pulse Type: S0
Pulse Rate: 1..999999 Imp/kWh (kvarh)
Display Type: digital
Mounting Type: REG
Width in Division Units: 4
Width: 70 mm
Depth: 65 mm
Height: 26.5 mm
Interface Design: other
EDL40 Signature: no
With Lock Code: no
Number of Digits: 7
Protection Class (IP): IP20
Protection Class (NEMA): other
ABB Stotz S&J Measuring Transformer Meter B24 212-100: additional details
Three-phase meter for measuring a three-wire or four-wire three-phase network via a transformer connection CT (transformer ratio for current configurable) up to a maximum of 6 A. The following values are displayed on a white backlit display with up to 7 digits: active energy (Class 1) and reactive energy (Class 2) for import and export, power, currents, voltages (L-L, L-N), frequency, cos phi, power factor, and apparent power, both per phase and total. Communication can occur via the integrated RS485 interface (Modbus RTU) or through the infrared interface for connecting a KNX module. The energy meter has a pulse output. The meter is calibrated according to MID and approved according to IEC. The installation width is 4 DIN modules.
9. ABB A41 111-100 A41 111-100 Alternating current meter
ABB Stotz S&J AC Meter A41 111-100
Manufacturer: ABB Stotz S&J
Description: AC Meter
Type: A41 111-100
Meter Type: electronic
Rated Current (In): 80 A
Maximum Current (Imax): 80 A
Rated Voltage (Un) N-L: 57.7..288 V
Frequency: 50..60 Hz
Accuracy Class: B
Number of Phases: single-phase
Design: direct measurement
Energy Type: active power
Suitable for: consumption
Tariff Type: single tariff
Load Profile Measurement: no
Reverse Prevention: yes
Calibrated: yes
Approval: Measuring Instruments Directive
Pulse Output: electrical
Pulse Type: S0
Pulse Rate: 1..999999 pulses/kWh (kvarh)
Display Type: digital
Mounting Type: REG
Width in Division Units: 4
Width: 70 mm
Depth: 65 mm
Height: 26.5 mm
Interface Design: other
EDL40 Signature: no
With Lock Code: no
Number of Digits: 7
Protection Class (IP): IP20
Protection Class (NEMA): other
ABB Stotz S&J AC Meter A41 111-100: additional details
The AC meter is designed for measuring single-phase networks via a direct connection for currents up to a maximum of 80 A. The following values are displayed on a white backlit display with up to 7 digits: active energy (Class 1), power, current, voltage (L-N), and frequency. Communication can occur via the integrated infrared interface for connecting a KNX module. The energy meter has one output, which can be used either as a pulse output for active energy or as an alarm output. Up to 25 alarm values (thresholds with time delay) can be set. The meter is calibrated according to MID and approved according to IEC. The installation width is 4 DIN modules.
10. ABB A44 113-100 Measuring transformer counter, M-Bus
Three-phase meter for measuring a three-wire or four-wire three-phase network via a transformer connection CTVT (transformer ratio for current and voltage configurable) up to a maximum of 6 A. The following values are displayed on a white backlit display with up to 7 digits: active energy (Class 1), power, currents, voltages (L-L, L-N), frequency, and power factor, both per phase and total. Communication can be established via the integrated M-Bus interface or through the infrared interface for connecting a KNX module. The energy meter has an output that can be used either as a pulse output for active energy or as an alarm output. Up to 25 alarm values (thresholds with time delay) can be set here. The meter is calibrated according to MID and approved according to IEC. The installation width is 7 DIN modules.
Product order
See all products