Best wolfcraft products in the Workbenches category
On this page you'll find a ranking of the best wolfcraft products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. wolfcraft Roller Trestle
With the height-adjustable and foldable roller stand, you create an optimal extension for your sawing table or workbench. The 300 mm wide support surface allows you to effortlessly and smoothly guide your workpieces in the desired processing direction. You can perform sawing or milling tasks on long workpieces in a controlled and energy-efficient manner with this helper. Thanks to the stepless height adjustment, you can adapt the roller stand to all standard machine tables and workbenches. After finishing your work, you can fold the roller stand together in seconds and store it space-savingly in the smallest space.
2. wolfcraft MASTER 750 ERGO Clamping and Machine Table
Whether as a clamping or machine table, the MASTER 750 ERGO from wolfcraft offers you ergonomics, safety, and versatility across the board. The table can be adjusted to a comfortable and back-friendly working height between 725 and 950 mm in six stages. Thanks to the locking points at each stage and the extension safety feature, the MASTER 750 ERGO also provides maximum safety for use with machines. You can easily secure your miter saw or wolfcraft drill stands on the tabletop. As a special extra, the MASTER 750 ERGO is equipped with a quick adjustment feature. By pulling the levers on the right and left under the tabletop, you can unlock the quick adjustment and quickly and comfortably move the front tabletop towards the workpiece. Just tighten it 2-3 times with the cranks, and the workpiece is securely and firmly clamped. The time-consuming cranking to bring the table to the workpiece is eliminated. As a clamping table, the MASTER 750 ERGO offers a horizontal clamping range of 130 mm between the tabletops and 425 mm between the four large plastic clamping jaws included. At maximum height adjustment, you can also easily clamp workpieces up to 110 mm wide vertically. The clamping jaws feature a reversible painting tip, making it easier for you to paint workpieces quickly. If you want to raise a workpiece, use the side with the support pin and anti-slip pad. With the two additional pipe clamps, you can also reliably hold rounded workpieces in position. As a work table, the MASTER 750 ERGO also impresses with working comfort and flexibility. The adjustable tabletops made of coated, FSC-certified MDF with beveled edges provide a work surface with a variable size of 680 x 390-520 mm.
3. wolfcraft Wall Unit
Wolfcraft GmbH is a company founded in 1949 by Robert Wolff, which is considered one of the co-founders of the German DIY industry. It operates as a manufacturer and supplier of tools and power tool accessories. The main customers include particularly hardware stores and specialized retail companies. The management is based in Kempenich in the Eifel region.
wolfcraft primarily produces in its own facility in Weibern as well as in Malé Dvorniky (Slovakia). To limit global goods tourism and the associated CO2 emissions, the European production sites are preferred over production capacities in the Far East.
With an export share of 70%, wolfcraft is an internationally operating company with its own sales staff in many European countries and numerous trade and distribution partners worldwide.
Employing over 600 people in 16 countries, the company has received several awards for its products, including a "red dot design award" for the "One Hand Clamp" and "Quickfix" products. Currently, around 2,500 items are offered under the wolfcraft brand.
4. wolfcraft MASTER 200 Clamping and Working Table
Wolfcraft GmbH is a company founded in 1949 by Robert Wolff, recognized as one of the co-founders of the German DIY industry. It operates as a manufacturer and supplier of tools and power tool accessories. Its main customers include hardware stores and specialized retail companies. The company's headquarters is located in Kempenich in the Eifel region.
wolfcraft primarily produces in its own facility in Weibern as well as in Malé Dvorniky (Slovakia). To limit global goods tourism and the associated CO2 emissions, European production sites are preferred over production capacities in the Far East.
With an export share of 70%, wolfcraft is an internationally operating company with its own sales representatives in many European countries, as well as numerous trade and distribution partners worldwide.
Employing over 600 people in 16 countries, the company has received several awards for its products, including a "red dot design award" for the "One Hand Clamp" and "Quickfix" products. Currently, around 2,500 items are offered under the wolfcraft brand.
5. wolfcraft Sägebock
The saw horse is a powerful and space-saving helper for cutting firewood. It offers an exceptionally high capacity for a folding saw horse. In one operation, you can saw several 1.00-meter logs into pieces that are 25 or 33 cm long. With just 2-3 cuts, the wheelbarrow is full without needing to stop the saw in between. A discharge safety feature prevents the dangerous rebound of wood pieces, securing them between the struts and ensuring greater safety. Of course, tool protection has also been considered: should a cut go awry, beech boards protect the chain of your chainsaw in the work area. With a folded size of 54 cm in width, 105 cm in height, and 19 cm in depth, you can store the mobile and compact saw horse made of sturdy round tubes space-efficiently in the garage after work. With the wolfcraft saw horse, safety and work enjoyment are guaranteed.
6. wolfcraft Machine Table MASTER cut 2200
With the universal work and machine table, you can transform standard handheld circular saws, jigsaws, and – with the separate milling stop – also routers into stationary devices. Thanks to the removable riving knife, it is one of the few machine tables that are compatible with riving knife-less circular saws. The machine plate is height-adjustable, providing a level transition to the work surface even with heavy equipment. When used as a table saw, you can achieve cuts of up to 390 mm in width with the parallel stop. The angle stop allows you to make precise cuts of up to 180° comfortably in series, while a new spring-loaded sliding element ensures optimal grip and a professional cutting result. Additionally, you can use the MASTER cut 1500 as a clamping and work table. With a load capacity of up to 200 kg, the machine table can easily support even massive wooden panels. The folding system stabilizes the innovative machine table with additional locking bolts and cross braces, ensuring safety. After work, you can fold it up compactly and conveniently store the MASTER cut 1500, which weighs only 17 kg and has small transport wheels, in minimal space.
7. wolfcraft Master Cut 1500 EU
New universal work and machine table in accordance with the latest EU safety regulations. Designed for precise stationary use of circular saws, jigsaws, and routers.
8. wolfcraft Multi-Function Support Stand and Roller Trestle
The multifunctional support and roller stand is ideal for laying, feeding, or rolling long boards, planks, or sheets. Its infinitely adjustable base makes it compatible with all standard machine tables and workbenches. With the solid 300 mm wide support, you can extend the surface area of your workbench or support long workpieces. To switch to the stored support surface, simply rotate the support 90°. The ball bearings allow the workpiece to glide, enabling you to comfortably feed and move the workpiece in any desired processing direction. With another 90° rotation, you can switch to the roller support, which facilitates feeding in the longitudinal direction. After finishing your work, you can fold the multifunctional support and roller stand for space-saving storage in just a few seconds.
9. wolfcraft SB 60 Saw Buck
With the wolfcraft drill stand, you can drill your workpieces precisely at the desired location and to the pre-set depth. The 40 mm diameter round column, equipped with a 420 mm long rack, ensures straight drilling without twisting. The European standard holder with a diameter of 43 mm is compatible with any standard drill. You can set the drilling depth with millimeter accuracy using the depth stop with quick adjustment and scale ring. The rack and pinion drive provides comfortable, stepless, and precise height adjustment of the control unit along with the drill. For easy lowering, you can use the 3-arm feed lever. The return spring assists you when retracting the machine. Even the small details are well thought out, such as a cable holder for organized management of the drill's power cord. You can attach vises in the clamping grooves to securely hold your workpiece in place. A clever helper that should not be missing in any workshop.
10. wolfcraft MASTER 650 ERGO Clamping and Working Table
The Master 650 Ergo is a height-adjustable, mobile clamping table that allows for flexible, back-friendly work. With its tabletop that can be tilted up to 65°, it can be used both as a clamping table and as a work table. You can individually adjust the optimal working height from 780 to 950 mm to suit your body size using an easy-to-operate extension mechanism with extension safety.
- Continuously height-adjustable with extension safety from 780 to 950 mm for ergonomic working height and safety
- Continuously tiltable tabletop up to 65° for a variety of applications
- Clamping range of 110 mm between the tabletops, 410 mm between the plastic clamping jaws for horizontal clamping
- Vertical clamping of workpieces up to 80 mm wide is possible at the maximum height setting
- Beveled carrying recess and oval, smooth aluminum rod for comfortable transport.
