Best selling Multimeters from Voltcraft
This page always stays fresh and updates automatically.
1. Voltcraft VC131 Digital Multimeter
The Voltcraft Handheld Multimeter VC 131 is your robust entry-level device for various measurement tasks and replaces the highly successful predecessors (VC-130 and VC-135). The device features automatic range selection and can measure both DC and AC voltages. However, for current measurement, this entry-level device is limited to measuring direct current only.
The impressive, easily readable EBTN display is clearly visible in both bright environments and darkness. With a display diagonal of 5.6 cm (2.2 inches), all digits and symbols are presented significantly larger, helping to avoid reading errors.
Subtly integrated edges protect the display, the rotary switch, and all buttons. A meticulously produced two-component housing with integrated soft rubber protection not only provides a good grip but also protects the measuring device during tougher applications.
The wide soft rubber base ensures significantly more stability when the stand is extended. The device remains in position both lying down and standing up with connected measuring leads. When stored without measuring leads, the rubber edge protection prevents slipping, even if the device is lying on the display side.
The built-in LED light makes it easier to navigate in the dark to the fuse box. An NCV sensor is integrated into the front of the housing, which detects the electromagnetic field generated by a live cable. This allows you to locate the position that leads to a break in a pinched extension cord, even through the insulation.
The measuring tips are optimally protected against contact. If necessary, a protective cap can be removed to measure, for example, in terminal blocks. The measuring lead is double insulated in two colors and features a wear indicator.
What our customers think
Pro
- Seems robust
- Nice large digital display
- Easy handling
2. Voltcraft VC-522
For easy and quick measurement of alternating currents up to 400 A. Unlike multimeters, the circuit does not need to be interrupted when measuring. Perfectly suited for servicing machines and control cabinets.
Multimeter functions: The device features voltage, frequency, temperature, capacitance, and resistance measurement functions with automatic range selection, as well as diode testing, True RMS, and an acoustic continuity tester. Additionally, the device is equipped with non-contact voltage testing.
High-contrast display with 4000 counts: Exceptionally readable display in all lighting conditions. Particularly in not fully illuminated control cabinets, this model outperforms traditional clamp meters. The display shows 4-digit values up to 3999, regardless of the position of the decimal point.
Hold button easily accessible with thumb: The hold button is used to save readings when the display cannot be viewed during measurement. This button is ergonomically placed for thumb access and does not need to be searched for, as is the case with traditional clamps.
Measurement point lighting: If needed, a bright LED with optics can be activated to illuminate the area directly in front of the clamp.
Non-slip placement: The VOLTCRAFT VC-522 maintains a non-slip contact with the surface. Unintentional slipping on uneven surfaces is effectively prevented by the rubber coating.
Robust and handy: The 2-component housing with integrated soft rubber protection makes the measuring device suitable for tough applications. The rubberized housing shell also provides a very good grip.
Prepared for belt systems: A standard thread for connection to safety holders or belt systems is integrated into the housing. The device can be secured against accidental dropping when working at height.
3. Voltcraft USB-Oszilloskop
This entry-level oscilloscope is extensively equipped for use with a Windows-compatible computer via USB interface. It has the advantage of allowing measurement data to be stored and processed further. The device features two independent channels that can capture signals up to 20 MHz. The screen interface is designed to resemble a traditional oscilloscope. The auto-set function for automatically adjusting settings to the respective measurement signal, along with comprehensive triggering functions, makes operation very easy. Special feature: Digital Storage Oscilloscope (DSO).
4. Voltcraft DOV1254F LA Digital-Oszilloskop 125 MHz 4-Kanal 1.25 GSa/s 100 Mpts 1
High-quality, innovative, and compact. The DOV oscilloscope series from Voltcraft impresses with a whole range of technical highlights and maximum user comfort: An analog-to-digital converter with 12-bit resolution is part of the standard equipment, along with USB, LAN, and HDMI interfaces. At the center is the 7-inch touch display with a resolution of 1024 x 600 pixels. It responds not only to touches but also to gestures, making cumbersome menu navigation largely unnecessary.
Outstanding technical specifications. All digital DOV oscilloscopes from Voltcraft operate with a maximum sampling rate of 1.25 GSa/s. The real-time capture rate is 50,000 wfms/s, and the segmented capture rate is 700,000 wfms/s, allowing for quick and precise capturing of irregular signals. The horizontal sampling speed ranges from 1 ns/div to 1000 s/div (1-2-5 steps).
Numerous trigger functions. One of the strengths of the DOV series from Voltcraft lies in its extensive trigger functions. Even difficult-to-trigger signals can be captured thanks to trigger types such as edge, video, pulse, slope, runt, window, timeout, Nth, logic, RS232/UART, I2C, SPI, CAN, and LIN triggers.
Specifications of the Voltcraft DOV1254F LA. The DOV1254F LA features a bandwidth of 125 MHz and four analog inputs. The signal recording length is 100 M, and for clear display and evaluation, real-time signal waveform display on the PC is possible. The four inputs CH1 to CH4 and the 16-channel logic analyzer serve as trigger sources. Users can choose between sampling modes: sample, peak, high resolution, average, and segmentation. The vertical sensitivity is adjustable from 200 µV/div to 10 V/div.
Integrated arbitrary function generator. For specific troubleshooting, an arbitrary waveform generator (AWG) with a sampling rate of 160 MSa/s, a vertical resolution of 14 bits, and a maximum frequency of 30 MHz is integrated.
Multimeter
EUR815,38
Voltcraft DOV1254F LA Digital-Oszilloskop 125 MHz 4-Kanal 1.25 GSa/s 100 Mpts 1
CAT II, Oscilloscope
5. Voltcraft ADO-3504 Digital-Oszilloskop 350 MHz 2.5 GSa/s 250 Mpts 12 Bit Digit
First-class technology in a compact format. The ADO-3504 oscilloscope from Voltcraft impresses with its high-quality features and handy design, making it ideal for mobile use. The heart of the device is the 10.1-inch display with a resolution of 1024 x 600 pixels. For system integration, various interfaces such as HDMI, USB, LAN, and a trigger output are available.
High-speed signal acquisition and performance. With a real-time sampling rate of up to 2.5 GSa/s, the ADO-3504 offers excellent time resolution. Thanks to the high update rate of 500,000 wfms/s, the Voltcraft oscilloscope can identify even extremely rare and short signal disturbances and display them accurately.
Comprehensive trigger options for complex analyses. The vast range of trigger functions allows for the analysis of complex signals. In addition to standard triggers, the device supports advanced functions such as runt, window, timeout, and logic triggers, as well as protocol decoding for serial buses.
Technical details. The ADO-3504 oscilloscope offers a bandwidth of 350 MHz, four analog channels, and an external trigger input with a memory depth of 250 Mpts. Trigger sources can be defined as CH1, CH2, CH3, CH4, the AC mains line, or an external signal. During acquisition, it is possible to switch flexibly between the modes of sample, peak, high resolution, average, or segmentation. The vertical sensitivity ranges from 500 µV/div to 10 V/div with a 12-bit resolution, allowing for a detailed representation of various amplitudes. The minimal background noise makes even the faintest signals visible without disruptive internal overlays.
Delivery with accessories. The Voltcraft oscilloscope is delivered as a ready-to-use complete package, including a power cable, USB-A and USB-B cables, four probes, and a calibration set.
Multimeter
−23%
EUR1939,– was EUR2529,–
Voltcraft ADO-3504 Digital-Oszilloskop 350 MHz 2.5 GSa/s 250 Mpts 12 Bit Digit
CAT II 300V
6. Voltcraft Device tester GT-6000 V2
Battery operated portable tester
RCD circuit breaker test
Automated testing for class I and II / III devices
Test of 3-phase electrical devices
Tripping time measurement of fixed RCDs and portable RCDs (PRCDs).
7. Voltcraft IST 3000 VDE tester
Reliable testing of electrical systems. Whether new construction, modernisation or maintenance: The Voltcraft IST 3000 offers all functions for testing electrical systems in accordance with the VDE 0100 standard. Earthing measurement is also possible with this model. Comprehensive range of services. The Voltcraft IST 3000 installation tester can be used to carry out all safety and function-related tests: from loop and insulation resistance to the measurement of low ohmic resistance and short-circuit currents through to continuity and RCD/FI tests. TRMS voltage, rotary field and frequency as well as phase shift and earthing resistance can be determined just as reliably. All settings and measured values are shown on the clear 480 x 320 TFT LCD colour display with backlight. Help screen. Help screens with colour diagrams are included for all measurement types, showing the correct use of the device to avoid operating errors. Documentation. Once the measurement has been completed, the results can be stored in the device's internal memory together with the partial results and function parameters. The Voltcraft IST 3000 can store up to 1000 measurements - the list of data records can be scrolled through step by step - a single data record or all data records can be deleted - the IDs for customer, location and object can be edited. Extensive range of accessories. The delivery package includes various test leads, cables and probes as well as alligator clips. A flexible shoulder strap and practical transport bag make mobile use easier. Also included in the delivery package are a USB cable, the mains adapter, six Ni-MH rechargeable batteries, operating instructions and a safety information sheet. Everything fits into the carrying bag supplied.
8. Voltcraft VC522 Current clamp
For easy and quick measurement of alternating currents up to 400 A. Unlike multimeters, the circuit does not need to be interrupted when measuring. Perfectly suited for servicing machines and in control cabinets.
Multimeter functions: The device features voltage, frequency, temperature, capacitance, and resistance measurement functions with automatic range selection, as well as diode testing, True RMS, and an acoustic continuity tester. Additionally, the device is equipped with non-contact voltage testing (NCV).
High-contrast display with 4000 counts: The exceptionally readable display is optimal in all lighting conditions. Especially in not fully illuminated control cabinets, this model outperforms conventional clamp meters. The display shows 4-digit values up to 3999 (4000 counts), regardless of where the decimal point is located.
Hold button easily reachable with thumb: The hold button is used to save readings when the display cannot be viewed during measurement. This button is ergonomically placed at the thumb position and does not need to be searched for, as is the case with conventional clamps.
Measurement point lighting: If needed, a bright LED with optics can be activated to illuminate the area directly in front of the clamp.
Non-slip placement: The VOLTCRAFT VC-522 always maintains a non-slip contact with the surface. Unwanted slipping on uneven surfaces is effectively prevented by the rubber coating.
Robust and handy: The 2-component housing with integrated soft rubber protection ensures that the measuring device withstands tough conditions. The rubberized housing shell also makes the device very easy to grip.
Prepared for belt systems: A standard thread for connecting to safety mounts or belt systems is integrated into the housing. The device can be secured against accidental dropping when working at heights.
9. Voltcraft VC-41 Steckdosentester CAT II 250 V LCD
The Voltcraft VC-41 socket tester is a reliable measuring device specifically designed for checking alternating voltages up to 250 V. With its digital display, it allows for precise and user-friendly handling. The tester is suitable for measurement category CAT II, making it ideal for use in households and small commercial applications. Its compact design and ease of use make the VC-41 suitable for both professionals and hobbyists. The device features a clear and easily readable LCD display that presents measurement results distinctly. The Voltcraft VC-41 is an essential tool for anyone who regularly checks electrical installations or performs maintenance work.
- Digital display for clear readability
- Suitable for alternating voltages up to 250 V
- Designed for measurement category CAT II, ideal for household applications.
10. Voltcraft Table multimeter
The Voltcraft VC-7200BT is a digital dual-channel multimeter in tabletop format with 5 1/2 digits, offering a wide range of functions for measurement results (statistics, limit values, dB/dBm, REL). The VC-7200BT features a 10.16 cm (4 inch) display. It records up to 150 measurement values per second. This device is ideal for anyone seeking high performance, numerous functions, and automatic measurements.
Precise RMS Measurements
The true RMS measurement function allows for accurate measurement of asymmetrical voltages and currents that deviate from the basic sine waveform. Asymmetrical voltages typically occur in power controllers, switched-mode power supplies, pulse chargers, and electronic speed controllers in model building.
Factory Calibration
Calibration according to manufacturer standards and Voltcraft quality assurance. The calibration ensures high product quality and compliance with tolerance limits.
Product order
See all products