Best selling Power generator accessories from my-PV
On this page you’ll find a ranking of the best Power generator accessories from my-PV. To give you a quick overview, we’ve added the most important product details. This page always stays fresh and updates automatically.
1. my-PV Power Controller
The my-PV power controller AC THOR #20-0100 is an advanced PV power manager that enables stepless control of power from 0 to 3 kW. This device is designed to optimize the use of solar energy for water heating and electric heating systems. Through intelligent control, the controller automatically adjusts the energy distribution to match the availability of photovoltaic power and the current heat demand. This not only ensures high residential comfort but also efficient use of the generated solar energy. The AC THOR is easy to install and operate, thanks to its user-friendly touch display. Additionally, the my-PV Cloud provides a comprehensive overview of energy consumption and system performance, allowing for easy monitoring and adjustments. The controller is suitable for both modern and renovated buildings and can be integrated into existing heating systems or replace conventional systems.
- Stepless control of power from 0 to 3 kW
- Easy installation and operation via a touch display
- Automatic adjustment of energy distribution to heat demand
- Integration into existing heating systems or replacement of conventional systems
- Compatible with my-PV Cloud for comprehensive monitoring and control.
2. my-PV Sol•Thor
My-PV SOLTHOR 0 - 3.6 kW, Interfaces: None, connection: DC. Efficient and self-sufficient heat generation. Infinitely variable control output from 0 - 3.6 kW. No inverter required. Loss-free conversion of all solar power into heat. Scalable from 1 - 10 photovoltaic modules. Also works in the event of a grid failure. No authorisation from the grid operator required.
3. my-PV 20-0650
My-PV screw-in heating element 20-0650
Manufacturer: my-PV
Designation: Screw-in heating element 9 kW without thermostat
Type: 20-0650
Connected load: 9 kW
Version: Screw-in heating element
Further details: This screw-in heating element was developed especially for use with the Photovoltaic Power Manager, AC THOR and ACTHOR 9s. It is 3-phase, 3x230 V, 50Hz, without thermostat, with STB, and includes a 3m mains cable with safety plug. Dimensions: WxHxD 88x88x873 mm. EAN: 9120095460211.
4. my-PV Temperature sensor for SOL-THOR Manager
The my-PV temperature sensor (MPN: 14-0120) provides the Power Manager SOL-THOR with crucial data for performance regulation. It helps ensure that the water heater efficiently utilizes solar power and adjusts the heating output based on the measured water temperature. With a cable length of 5 m, installation is well-planned and allows for precise temperature measurement. Simply connect it and get started immediately without the need for additional settings. For applications where higher temperatures are desired, such as over 90 °C in the buffer tank, temperature sensors are required alongside the screw-in heating elements.
About the temperature sensor
- Hot water generation using solar power
- Compatible with SOL-THOR water heater
- Precise temperature measurement
- Heating support
- 5 m long cable
- Easy installation and user-friendly
Technical specifications
- Cable length: 5 m
- Weight: approx. 55 g
- Sensor dimensions: 20 x 5 mm
Scope of delivery
1x my-PV temperature sensor for SOL-THOR.
5. my-PV AC-Thor
The my-PV temperature sensor provides the power managers AC-THOR and AC-THOR 9s with crucial data for power regulation. It helps ensure that water heaters efficiently utilize solar power and adjust heating performance based on the measured water temperature. With a cable length of 5 meters, installation is well-planned and allows for precise temperature measurement. Simply connect it and get started immediately, without needing to make additional settings. For applications where higher temperatures are desired, such as over 90 °C in the buffer storage, temperature sensors are required alongside the screw-in heating elements.
About the temperature sensor:
- Hot water generation using solar power
- Compatible with 2 power managers
- Precise temperature measurement
- Heating support
- 5 m long cable
- Warranty: 2 years
- Easy installation
Technical specifications:
- Cable length: 5 m
- Weight: 130 g
- Sleeve diameter: 6 mm
- Dimensions: 5000 x 6 x 6 mm
Delivery includes:
1x my-PV temperature sensor for AC-THOR and AC-THOR 9s.
6. my-PV Ac Elwa 2
AC Elwa 2 is a 0 - 3.5 kW linearly controlled hot water heating device for grid-connected photovoltaic systems and the successor to the proven AC ELWA-E. To maximize the self-consumption of your current PV system, AC Elwa 2 uses excess photovoltaic energy to heat your water. The increasing independence also protects against unpredictable or rising operating costs. With linear control, the PV feed-in power can be regulated to zero.
7. my-PV Elwa
Elwa is a 2 kW photovoltaic water heating device, perfectly suited for those who want to use their solar power exclusively for the production of hot water. The direct current from the photovoltaic modules is transmitted directly to the built-in heating element and converted into heat immediately and without loss. The integrated MPP tracker ensures that the PV generator always operates at the optimal working point, similar to a PV inverter. The Elwa operates independently of the power grid, as it is powered by the PV generator, making it a pure off-grid system. A rotary knob allows you to set the desired hot water temperature, and LED indicators provide information about the current device status. Schuko plug.
Product order
See all products