Top rated Garden flooring
Here's a ranking of the top rated products in this category. To give you a quick overview, we've also added some key information about the products.
1. Eurotec Underpacking pads
The Eurotec underlay pads are an effective solution for terrace construction, specifically designed to provide a stable and protective base for wooden substructures. These pads are made from high-quality rubber granulate and serve as spacers between the substructure and the foundation or ground. They contribute to the structural wood protection function by shielding the support beams from moisture and other harmful influences. Additionally, the underlay pads allow for height leveling of the substructure, which is particularly beneficial on uneven surfaces. The even load distribution ensures that small irregularities in the ground are compensated, enhancing the durability of the terrace. Furthermore, the pads provide impact sound insulation, improving comfort when walking on the terrace. The underlay pads can be individually cut to meet the specific requirements of the project.
- Structural wood protection for support beams
- Height leveling of the substructure possible
- Even load distribution to compensate for small irregularities
- Impact sound and noise insulation.
2. Terrafix Spacer
With the spacer for visible fastening, terrace boards can be laid quickly and easily. Without any additional tools, a uniform installation pattern of the boards is achieved. The Terrafix also guarantees the necessary distances between the individual terrace boards and the underlying substructure. This constructive wood protection prevents water accumulation and ensures proper ventilation.
Product advantages: made of fiberglass-reinforced polyamide. Distance between the boards and the substructure: 6 mm uniform joint spacing.
Includes drilling template for precise marking of the drill holes.
Delivery includes: Drilling template for precise marking of the drill holes.
a (mm): 7 b (mm): 6 L (mm): 88 Material: Plastic Quantity (pcs): 100 Brand: KARLE & RUBNER Content (PK): 1.
3. Eurotec Dista-Leiste 2.0
The Dista skirting board 2.0 is ideally suited for the visible fixing of decking. It acts as a spacer and allows freedom of movement between the panel and the substructure. At the same time, it promotes air circulation under the decking, resulting in less rotting.
Product benefits:
- Promotes air circulation under the decking
- Creates a movement clearance of 7 mm between the substructure and decking boards
- Reduces the risk of sheared fixing screws due to swelling and shrinkage of the decking boards
- Less rotting
Hardwoods and tropical woods should always be pre-drilled. The Dista skirting board 2.0 is fastened and fixed with decking screws Ø4 mm in the holes provided. Screws are not included in the scope of delivery; 5 screws are required for one Dista skirting board 2.0.
Note: The Dista moulding is made of hard plastic and is designed to prevent the stainless steel screws from shearing off. Shearing is caused by the swelling and shrinking of the wood, known as working. The working is particularly pronounced in the transverse direction of the planks. The wood "wants" to take the screw with it, while the lower part of the screw is still firmly seated in the substructure. As hardwood and tropical wood is very hard due to its high density, the screw has no chance of pressing into the wood when it is working. If the screw breaks off under this load, this is known as shearing. The Dista strip 2.0 was developed to prevent stainless steel screws from shearing off. It creates a movement space of 7 mm between the substructure and the decking board, allowing the stainless steel screws to move with it.
Dimension (mm): 30x700x7
Material: Hard plastic
Content (ST): 50.
4. Karle und Rubner Terrace bearing CLIP
The innovative CLIP attachment of the adjustable foot enables a nearly screwless assembly when used with the H-Isostep, BIG, or TWIXT-Isostep CLIP substructure. The CLIP components achieve a simple and even faster setup of the entire substructure through this combination.
Product advantages: The multi-directional attachment compensates for ground slopes of up to 8%. The double thread allows for stepless and precise height adjustment by simply turning it right or left. Quick assembly of the substructure in conjunction with the Isostep-CLIP rails. Nearly screwless installation. The Terracon® supports have proven themselves in practice for years.
Approximately 3.5 - 5 terrace supports are needed per m². This depends on the type and dimensions of the substructure and the planks.
Note: It is necessary to securely fasten the terrace supports to the ground using dowels or concrete screws. Alternatively, the support can also be glued to the ground. When using concrete slabs, be careful not to damage them while drilling.
Load capacity (kg): 814 Material: Plastic Height adjustment (mm): 25-40 Size: 25-40 | 1 piece Brand: KARLE & RUBNER Quantity (ST): 1.
5. Silvadec Double mounting clip
Double clip inox Pack of 10 pcs.
6. Relaxdays Concrete Paving Mould
Concrete mold for DIY garden projects
Design your garden according to your own ideas with a bit of craftsmanship. Whether it's walkways, a patio, or other stone platforms in the garden - with the concrete or cement casting mold, you have a useful tool at your disposal. Placed on a suitable surface, you can smooth the filling material inside and then lift the mold off - done! This mold is particularly well-suited for straight paths and edges, allowing for individual garden design even on a small budget.
7. Eurotec Adjustable feet
The adjustable feet from Eurotec are a practical solution for terrace construction. They are made from high-quality hard plastic and offer a load capacity of up to 2.2 kN, making them ideal for supporting terrace coverings. These feet are height-adjustable, allowing for flexible adaptation to different substrates. They are particularly useful for creating a stable and even base for terrace structures. With a width of 150 mm and a length of 60 mm, they are compact yet robust enough to withstand outdoor conditions. The use of hard plastic ensures durability and weather resistance, making maintenance and care of the terrace easier.
- Height-adjustable for flexible adjustments
- Load capacity of up to 2.2 kN
- Made from durable hard plastic.
8. Eurotec Unterlagepad Kork 60 x 60 x 6mm
The cork underlay pad from Eurotec is a practical solution for terrace construction. These self-adhesive pads offer excellent water resistance and are moisture-resistant, making them ideal for outdoor use. Cork is known for its pressure stability and load-bearing capacity, providing reliable support. Additionally, they hardly expand, which promotes the durability and stability of the construction. As a sustainable and ecological natural product, cork helps reduce the ecological footprint and is an environmentally friendly choice for construction projects. The use of cork as a material not only ensures high functionality but also provides an appealing aesthetic.
- Self-adhesive for easy application
- Water-resistant and moisture-resistant
- Sustainable and ecological natural product.
9. Eurotec Adjustable feet ECO
The ECO adjustable feet from Eurotec are a practical solution for terrace construction, allowing for flexible height adjustments. Made from robust hard plastic, these support feet offer a high load capacity of 2.2 kN, making them ideal for various outdoor applications. They are particularly suitable for the installation of terrace coverings and provide a stable and even base. The use of hard plastic ensures a long lifespan and resistance to weather conditions. With a width of 150 mm and a length of 130 mm, the adjustable feet are compact and easy to handle, facilitating installation. This functionality makes them an essential accessory for anyone planning a terrace or similar outdoor area.
- Height adjustable for flexible adjustments
- High load capacity of 2.2 kN
- Durable hard plastic material for longevity.
10. Spax Brettrichter-Set
The Spax Kaiman pro board spacer is a comprehensive set that not only includes the board spacer itself but also additional useful tools for your decking project. With the Spax Kaiman pro board spacer, you can easily align warped decking boards parallel to those already screwed in place. The liner ensures a perfectly straight and even screw pattern. The four gap spacers guarantee a consistent gap width between the boards, selectable in 4, 5, 6, or 7 mm. This means that with this single set provided in a practical case by Spax, you have all the tools needed for the visually perfect installation of decking boards at your fingertips.
Features:
- Liner: Allows for a perfectly straight and even screw pattern
- Four gap spacers: Ensure consistent gap width between the boards, selectable in 4, 5, 6, or 7 mm
- Practical case: All tools for the visually perfect installation of decking boards packed in one set
- Optimal solution: All necessary tools for installing decking boards in a convenient set
Delivery includes:
1 piece of screw template (liner)
1 piece of pencil
4 pieces of gap spacers for 4 gap widths of 4, 5, 6 & 7 mm
1 piece of plastic case.
