Best selling Heat shrink tubings
Here’s a ranking of the best selling Heat shrink tubings. To give you a quick overview, we’ve added the most important information about each product. This page always stays fresh and updates automatically.
1. CellPack Heat shrink tubing
Cellpack shrink tubes SR2 63-19/1000 black are medium wall shrink tubes. They have a shrink ratio of 3:1 with an inner diameter before shrinking of 63 mm and an inner diameter after shrinking of 19 mm. The nominal diameter in inches is not specified, and the wall thickness after shrinking is 2.8 mm. The length of the tube is 1 m, and it operates within a temperature range of -40 to 120 °C. The color is black and it is not transparent. Made from polyolefins (PO-X), it is halogen-free and has no internal adhesive. The tube is printable but does not have UL approval.
This medium wall shrink tube is suitable for applications such as insulation, pressure and moisture protection, and is ideal for shrink tubes and shrink seals. It is resistant to chemical influences, UV-stabilized, free from substances that affect paint wetting, non-corrosive, non-melting, and offers very good electrical properties as well as high tensile strength and cold flow resistance.
The delivery includes shrink tubes in medium wall sections. The packaging unit consists of 1 piece.
2. Steinel Heat shrink tubing
The shrink tubes from Steinel are a practical solution for electrical installations. This comprehensive set includes 70 pieces of shrink tubes, which are ideal for shrinking cable ends, breaks, and bundles. With a diameter range of 1.6 to 4.8 mm, they offer versatile application possibilities. Made from high-quality plastic, these shrink tubes ensure reliable insulation and protection for electrical connections. They are compatible with Steinel hot air guns, making application easier and increasing efficiency. Whether for professional applications or DIY projects, this set is a valuable addition to any workshop.
- Comprehensive set with 70 shrink tubes
- Diameter range of 1.6 to 4.8 mm
- High-quality plastic material for reliable insulation
- Ideal for electrical installations and repairs.
Heat shrink tubing
−45%
only 9 of 9 remaining on sale
EUR3,66 was EUR6,69
Steinel Heat shrink tubing
70x
3. 3M TE100046537 Heat shrink tubing (TE100046537)
3M Germany Heat Shrink Tubing MDT-A 12/3
Manufacturer: 3M Germany
Designation: Heat shrink tubing with 12/3 mm, black
Type: MDT-A 12/3
Design: medium wall
Shrink ratio: 4:1
Inner diameter before shrinkage: 12 mm
Inner diameter after shrinkage: 3 mm
Wall thickness after shrinkage: 3.1 mm
Length: 1 m
Operating temperature: 130 °C
Color: black
Transparent: no
Material: Polyolefins (PO-X)
Halogen-free: yes
With internal adhesive: yes
Printable: no
UL approval: no
The 3M Heat Shrink Tubing MDT-A is a halogen-free, medium-walled heat shrink tubing made from cross-linked polyolefin with a hot melt adhesive coating. The hot melt adhesive penetrates all unevenness and cavities, preventing moisture ingress. The 3M Heat Shrink Tubing MDT-A is suitable for insulating plastic and mass cables up to 0.6/1 kV for both outdoor and underground installation. This aging-resistant heat shrink tubing is UV resistant and resistant to many chemical influences. It can be used in a temperature range of -55 °C to +130 °C. With its high shrink ratio of 4:1, you can accommodate large diameter jumps with just one tubing. The 3M Heat Shrink Tubing MDT-A meets technical requirements according to IEC 60684 and is approved by Lloyds Register of Shipping, Certificate 95/30032(E5). It is halogen-free and RoHS compliant.
4. Velleman Shrink tubing set
Heat shrink tubing is commonly used for connecting electrical cables, insulating soldered points in resistors and capacitors, marking and protecting electrical cables, protecting metal rods or pipes from corrosion, and safeguarding antennas. These waterproof heat shrink tubes are used for connecting fiber optic cables.
5. 3M HDT-AN-43/12 Heat shrink tubing,halogenfr. 43 / 12
3M Deutschland Heat Shrink Tubing Thick Wall HDT-AN-43/12
Manufacturer: 3M Deutschland
Description: Heat shrink tubing thick wall 43/12 mm, black, with adhesive
Type: HDT-AN-43/12
Design: thick-walled
Shrink Ratio: 3:1
Inner Diameter Before Shrink: 43 mm
Inner Diameter After Shrink: 12 mm
Wall Thickness After Shrink: 4.7 mm
Length: 1 m
Operating Temperature: 130 °C
Color: black
Material: Polyolefins (PO-X)
Halogen-Free: yes
With Internal Adhesive: yes
Printable: no
UL Approval: no
The 3M Heat Shrink Tubing HDT-AN is a thick-walled, halogen-free heat shrink tubing made from modified, cross-linked polyolefin. It is suitable for use on all plastic and mass cables for installations both indoors and for outdoor and underground applications. It serves to insulate and seal connections of all kinds, particularly as an outer tubing for control cable assemblies. For better sealing, it features an adhesive coating on the inner wall. This highly aging-resistant heat shrink tubing is UV-resistant and resistant to many chemical influences. Its shrink ratio is 4:1, and it can be used in a temperature range of -55 °C to +130 °C. It is not self-extinguishing.
6. Quadrios Premium heat shrink tubing assortment, 100 pieces - shrink ratio 3:1, with inner adhesive
This assortment is particularly suitable for DIY enthusiasts, craftsmen, field service, service workshops, electronics technicians, and laboratory needs. You will receive a 100-piece premium heat shrink tubing assortment with a shrink ratio of 3:1, covering a range from 1.6 to 12.7 mm in black, featuring hot melt adhesive on the inside: waterproof when properly overlapped! Thanks to the variety of sizes included, the heat shrink tubing sections can be used for insulation, protective covering of components, as strain relief, protection against corrosion, and for repairing cables and wires.
Heat shrink tubing
Quantity discount
EUR10,58 per piece for 3 units
Quadrios Premium heat shrink tubing assortment, 100 pieces - shrink ratio 3:1, with inner adhesive
100x
7. Wago Line repair kit
WAGO GmbH & Co. KG Cable Repair Kit 207-5485/316-000
Description: Cable repair kit for jacketed cables.
Type: Heat shrink tubing
Design: Medium wall thickness
Shrink ratio: 4:1
Inner diameter before shrinking: 24 mm
Inner diameter after shrinking: 8 mm
Nominal cross-section: 0.75 to 4 mm²
Wall thickness after shrinking: 2.7 mm
Length: 16 m
Operating temperature: -55 to 75 °C
Color: Black
Transparent: No
Material: Polyolefin (PO-X)
Halogen-free: No
With internal adhesive: Yes
Printable: No
UL approval: Yes
Additional details: Cable repair kit for jacketed cables, through hole with adhesive. Cable diameter 8 - 24 mm with included connection terminals, medium wall thickness, black.
8. HellermannTyton Heat shrink tubing polyolefin, radiation cross-linked, 1.65... 7.5mm, black, 1.2m (SA47-LA
Standard wall thickness: higher mechanical strength than thin-walled, more flexible than medium-walled. 4:1 covers a wide range of applications with high clamping pressure. The thermoplastic high-performance inner adhesive achieves sealing values far exceeding the usual requirements in the automotive industry. It reliably prevents electrochemical corrosion. Good mechanical strength. Resistant to typical automotive fluids. The transparent outer layer with black inner adhesive allows for subsequent visual inspection. Halogen-free. SA47-LA offers excellent protection against moisture and corrosion for all electrical connections and is resistant to typical automotive oils and fluids. The use of a black inner adhesive in combination with a transparent shrink tube enables subsequent visual inspection of the shrinkage process. Air inclusions and suboptimal adhesive application can thus still be detected and assessed afterwards.
Heat shrink tubing
EUR48,90
HellermannTyton Heat shrink tubing polyolefin, radiation cross-linked, 1.65... 7.5mm, black, 1.2m (SA47-LA
25x
9. Tru Components Schrumpfschlauch mit Innenkleber 4:1
The heat shrink tubing with inner adhesive from Tru Components is a versatile product that is ideal for various applications in electronics and cable processing. With a shrink ratio of 4:1, this tubing allows for effective and secure insulation of cable connections. The tubing is transparent and measures 1.22 meters in length, making it particularly practical for custom adjustments. Before shrinking, the tubing has a diameter of 20 millimeters, covering a wide range of applications. The inner adhesive provides additional adhesion and sealing, enhancing the durability and reliability of the connection. The minimum shrink temperature is 80 degrees Celsius, allowing for easy handling and application. Made from high-quality polyolefin, this heat shrink tubing offers excellent resistance to various environmental influences, making it a reliable choice for both professional and personal projects.
10. HellermannTyton Heat shrink tubing with adhesive Tr
The thin-walled, flexible heat shrink tubing with hot melt adhesive lining and a shrink ratio of 3:1 is made of cross-linked polyolefin. It is available in 5 sizes ranging from 3 to 24 mm in a dispenser box with a clear table for application areas.
Product order
See all products