Residual-current device
EUR83,90
Siemens Earth leakage circuit breaker C16 1p+N 0.03A A 5SU1326-7FP16
Best selling Residual-current devices
Here’s a ranking of the best selling Residual-current devices. To give you a quick overview, we’ve added the most important information about each product. This page always stays fresh and updates automatically.
1. Siemens Earth leakage circuit breaker C16 1p+N 0.03A A 5SU1326-7FP16
FI/LS switch, 6 kA, 2P Type A, 30 mA, C-Characteristic, In: 16A Un: 230V. SENTRON 5SU1 FI/LS switch for combined protection against overload, short circuit, and fault currents. Our FI/LS switches (RCBO) are VDE tested and certified according to DIN EN 61009-1, DIN EN 61009-2-1. With their double-chamber terminals, connecting conductors of different cross-sections is very easy. Other Siemens SENTRON protective devices can be quickly and easily connected with the 5ST3 busbars. The data matrix code on the device provides quick access to all technical data in the Siemens Industry Online Support App. SENTRON protective devices can be expanded with a wide range of functions using the continuous accessories from the system modular kit. Optimal technology for your safety - only from Siemens.
2. Siemens Circuit breaker 5SL6616-7 C16A 3+Npole 6kA
Siemens circuit breaker 5SL6616-7
Manufacturer: Siemens
Designation: Circuit breaker 400V 6kA 3+N C 16A
Type: 5SL6616-7
Installation depth: 70 mm
Tripping characteristic: C
Number of poles (total): 4
Number of protected poles: 3
Rated current: 16 A
Rated voltage: 400 V
Rated short-circuit capacity Icn according to EN 60898 at 230 V: 6 kA
Voltage type: AC
Rated short-circuit capacity Icn according to EN 60898 at 400 V: 6 kA
Rated short-circuit capacity Icu according to IEC 60947-2 at 230 V: 6 kA
Rated short-circuit capacity Icu according to IEC 60947-2 at 400 V: 6 kA
Frequency: 50 Hz
Energy limitation class: 3
Flush-mounted: no
Switching neutral conductor: yes
Overvoltage category: 3
Degree of pollution: 2
Additional devices possible: yes
Width in division units: 4
Protection class (IP): IP20
Ambient temperature during operation: -25 to 45 °C
Connectable conductor cross-section multi-stranded: 0.75 to 25 mm²
Connectable conductor cross-section single-stranded: 0.75 to 25 mm²
Explosion-proof: no
The SENTRON 5SL circuit breaker provides reliable short-circuit and overload protection for standard applications in residential and commercial buildings. The device can be mounted and dismounted without tools. The wiring of the supply is made easy by the rear-mounted busbar. The 5SL circuit breakers are available in various versions, including 1-, 2-, 3-, 4-, as well as 1+N and 3+N pole variants and other special types. A wide range of accessories, such as auxiliary switches, allows for diverse functional expansions. Simply safe with SENTRON protection devices.
3. Siemens Miniature circuit breaker 5SL6525-7 1 pc.
Siemens Circuit Breaker 5SL6525-7
Manufacturer: Siemens
Designation: Circuit breaker 230V 6kA 1+N C 25A
Type: 5SL6525-7
Installation depth: 70 mm
Tripping characteristic: C
Number of poles (total): 2
Number of protected poles: 1
Rated current: 25 A
Rated voltage: 230 V
Rated short-circuit capacity Icn according to EN 60898 at 230 V: 6 kA
Voltage type: AC
Rated short-circuit capacity Icn according to EN 60898 at 400 V: 6 kA
Rated short-circuit capacity Icu according to IEC 60947-2 at 230 V: 6 kA
Rated short-circuit capacity Icu according to IEC 60947-2 at 400 V: 6 kA
Frequency: 50 Hz
Energy limiting class: 3
Flush-mounted: no
Switching neutral conductor: yes
Overvoltage category: 3
Degree of pollution: 2
Additional devices possible: yes
Width in division units: 2
Protection class (IP): IP20
Ambient temperature during operation: -25 to 45 °C
Connectable conductor cross-section multi-stranded: 0.75 to 25 mm²
Connectable conductor cross-section single-stranded: 0.75 to 25 mm²
Explosion-proof: no
Siemens Circuit Breaker 5SL6525-7: additional details
Circuit breaker 230V 6kA, 1+N-pole, C, 25A.
SENTRON 5SL circuit breakers provide safe short-circuit and overload protection for standard applications in residential and commercial buildings. Tool-free installation and removal of the device. Easy wiring of the supply through the rear-mounted busbar. The 5SL circuit breakers are available in 1-, 2-, 3-, 4-, as well as 1+N and 3+N pole versions, along with other special types. The extensive accessories, such as auxiliary switches, allow for versatile function expansion. Simply safe with SENTRON protection devices.
Residual-current device
−18%
only 1 piece on sale
EUR14,55 was EUR17,79
Siemens Miniature circuit breaker 5SL6525-7 1 pc.
4. Hager Helicopter 3 + N AC Switch B 10A 0.03A Type A 6kA Type RCBO (ADZ310D)
Residual current circuit breaker 3X 1PN 6kA B-10A 30mA Type QuickConnect. Residual current circuit breaker according to DIN EN61009-1 VDE 0664-20 with a single-pole circuit breaker for 230 AC circuits and a residual current protection circuit in a compact housing. QuickConnect terminal according to DIN EN 60898-1 VDE 0641-11, with a load capacity of up to 16 A at the output and up to 63 A at the input, blue test button and residual current indicator. Easy individual removal from the phase rail assembly. Suitable for retrofitting additional devices. Labeling option directly on the device. ADZ310D.
Residual-current device
−24%
only 5 of 5 remaining on sale
EUR94,46 was EUR123,83
Hager Helicopter 3 + N AC Switch B 10A 0.03A Type A 6kA Type RCBO (ADZ310D)
5. Doepke FI/LS combination
RCBOs combine residual current and circuit breakers in one device (RCCB/MCCB combination). They protect people from fault currents and installations from short circuits and overloads. The DRCBO 4 has a rated breaking capacity of 6 kA. In addition to a tripped indicator, it also features a labeling window. Type A switches are sensitive to pulsating and alternating currents. This function is independent of the mains voltage. Switches with characteristic B are the standard protection for lighting and socket circuits. Standard switches are designed for circuits with a rated voltage of 230 V or 400 V and a rated frequency of 50 Hz.
Features: pulsating and alternating current sensitivity, mains voltage-independent tripping, compact size for all rated currents, switching position indicator, separate indication of the tripping reason, terminal blocks with a wide clamping cross-section range on both connection sides, neutral conductor on the right, labeling window, mounting type: quick fastening on mounting rail, installation position arbitrary, power supply arbitrary.
Applications: Protection of circuits in residential and commercial buildings as well as industrial plants with TN-S, TT, and TN-C-S networks. In IT networks, RCCB/MCCB switches can be used for disconnection in the event of a second earth fault. Use in systems with TN-C networks and for the protection of circuits where power electronics devices can cause smooth direct fault currents or fault currents with frequencies other than 50/60 Hz is excluded.
6. Doepke GmbH RCD switch DFS4 040-4/0.03A 500
The Doepke GmbH residual current circuit breaker DFS4 040-4/0.03A 500 is a highly advanced device designed for use in single-phase and three-phase networks. This circuit breaker provides reliable protection for people, animals, and electrical systems by automatically disconnecting the power supply in the event of dangerously high fault currents. With a compact design that occupies only four modular units, the DFS4 is suitable for both standard applications and special requirements. The devices are available in various versions and offer high short-circuit resistance as well as the ability to connect large conductor cross-sections via the double-decker terminals on both sides. The integrated switching position indicator and the viewing window for labeling stickers facilitate handling and maintenance. The multifunctional operating knob allows for easy operation and troubleshooting, making this residual current circuit breaker a practical choice for various electrical installations.
- Two- or four-pole design for flexible applications
- Network and auxiliary voltage-independent tripping for increased safety
- Sensitivity for alternating and pulsating direct fault currents (Type A)
- High short-circuit resistance for reliable operation
- Easy mounting on DIN rail with wide double-decker terminals.
7. Eaton Leitungsschutzschalter
The Eaton miniature circuit breaker (PLSM-C16/3N-MW) is a reliable and safe device designed for the protection of electrical installations. With a rated current of 16 amps and a type C tripping characteristic, this circuit breaker provides effective protection against overloads and short circuits. The circuit breaker is suitable for mounting on a top-hat rail and fulfils the requirements for protection class IP20, making it ideal for use in dry indoor areas. Manufactured in Germany, the Eaton miniature circuit-breaker stands for high quality and durability. It is suitable for both AC and DC applications and therefore offers a wide range of possible uses in various electrical systems. Rated current of 16 A for reliable protection. Tripping characteristic C for medium overload protection requirements. Suitable for DIN rail mounting, making installation easier. Versatile for AC and DC applications.
8. Schneider Electric Automatic control unit B 32A 3-pole R9F23332 Resi9
Schneider Electric Circuit Breaker R9F23332
Manufacturer: Schneider Electric
Designation: Circuit Breaker 3P, 32A
Type: R9F23332
Installation Depth: 44 mm
Tripping Characteristic: B
Number of Poles (total): 3
Number of Protected Poles: 3
Rated Current: 32 A
Rated Voltage: 400 V
Rated Insulation Voltage Ui: 440 V
Rated Impulse Voltage Uimp: 4 kV
Voltage Type: AC
Rated Switching Capacity Icn according to EN 60898 at 400 V: 6 kA
Frequency: 50..60 Hz
Power Loss: 3.2 W
Energy Limitation Class: 3
Flush Mounting: no
Switching Neutral Conductor: no
Overvoltage Category: 3
Degree of Pollution: 2
Additional Devices Possible: no
Width in Division Units: 3
Protection Class (IP): IP20
Ambient Temperature During Operation: -25..60 °C
Connectable Conductor Cross-section Multi-stranded: 1..25 mm²
Connectable Conductor Cross-section Solid: 1..35 mm²
Explosion Protected: no
Schneider Electric Circuit Breaker R9F23332: additional details
Resi9 circuit breaker, 3-pole, 32A, characteristic B. Switching capacity of 6kA according to IEC/EN 60898-1. Dual-function terminal for cables and fork busbar at the bottom of the device. Rear-mounted DIN rail fastening element at the bottom of the device. Spring mechanism for low-wear and user-independent switching of contacts. Color shade RAL 9003.
Residual-current device
−10%
EUR23,69 was EUR26,32
Schneider Electric Automatic control unit B 32A 3-pole R9F23332 Resi9
9. Schneider Electric Acti9 iMX tripping unit 100-415VAC
Range: Acti 9
Series: iMX
Type: Shunt release
Control voltage: 100 to 415 V AC, 110 to 130 V DC
Auxiliary contacts: Auxiliary electrical components are combined with iC60 circuit breakers, iID residual current circuit breakers, iSW-NA remotely tripped disconnect switches, RCA remote controls, and ARA automatic make contacts. They provide trip or remote indication of their position (open/closed/tripped) in the event of a fault.
Tripping auxiliary components:
- iMN: Undervoltage release
- iMNs: Undervoltage release with delay
- iMNx: Undervoltage release, independent of supply voltage
- iMX: Shunt release
- IMX + OF: Shunt release with NC/NO contact
Indicator auxiliary components:
- iOF: Normally closed/normally open contact
- iSD: Fault indication contact
- IOF/SD + OF: Normally closed/normally open contact and switchable OF or SD contact.
Residual-current device
only 1 piece
EUR17,60 was EUR19,55
Schneider Electric Acti9 iMX tripping unit 100-415VAC
10. Siemens 5SL6016-6 LINE PROTECTION 6KA 1+N-POLE/1TE B16
Siemens digital industrial circuit breaker 5SL6016-6
Manufacturer: Siemens Digital Industrial
Description: Circuit breaker 230V 6kA 1+N-pole
Type: 5SL6016-6
Installation depth: 70 mm
Tripping characteristic: B
Number of poles (total): 2
Number of protected poles: 1
Rated current: 16 A
Rated voltage: 230 V
Rated insulation voltage Ui: 250 V
Rated impulse voltage withstand Uimp: 4 kV
Rated breaking capacity Icn according to EN 60898 at 230 V: 6 kA
Voltage type: AC
Rated breaking capacity Icn according to EN 60898 at 400 V: 6 kA
Frequency: 50 Hz
Energy limitation class: 3
Flush-mounted: no
Switching neutral conductor: yes
Overvoltage category: 3
Degree of pollution: 2
Additional devices possible: yes
Width in division units: 1
Protection class (IP): IP20
Ambient temperature during operation: -25 to 60 °C
Connectable conductor cross-section multi-stranded: 0.75 to 16 mm²
Connectable conductor cross-section single-stranded: 0.75 to 16 mm²
Explosion-proof: no
Siemens digital industrial circuit breaker 5SL6016-6: further details
Circuit breaker 230V 6kA, 1+N-pole/1TE B16 SENTRON circuit breaker for safe short-circuit and overload protection for standard applications in residential and commercial buildings. Tool-free installation and removal of the device. Simple wiring of the supply through the rear-mounted busbar. The 5SL circuit breakers are available in 1-, 2-, 3-, 4-, as well as 1+N and 3+N-pole versions, along with other special types. The extensive accessories, such as auxiliary switches, allow for versatile expansion of functions. Simply safe with SENTRON protection devices.
EAN: 4001869533834.
Product order
See all products