Digital operation in Motorola II format: maximum of 255 addresses, 14 or 27 speed steps, functions F0 to F8 (F5 to F8 via second address). Programming: Register. Digital operation in DCC format: 127 basic addresses or 10,239 extended addresses, 14, 28, or 128 speed steps, functions F0 to F28. Programming: configuration variables (Direct Programming on the programming track, DCC compliant) or POM (Programming on Main). Analog operation: analog systems with DC power supply, automatic analog detection, switchable. Automatic processes, speed-dependent switching on and off. Application examples: switching the high beam or cab lighting on and off. Automatic registration via DCC-A function outputs. Assignment of functions to outputs with Function Mapping according to RCN-227. Each function (F0 to F28, separately for forward and reverse operation) can be assigned one or more outputs. Additionally, there is the possibility to assign a different function as an OFF switch to the functions. Assignment of outputs to functions: freely selectable. Effects of function outputs: direction-dependent switching. Shunting light: When switching to shunting mode, the shunting locomotive signals are activated while the signals for normal operation are turned off. Inverted switching: In the "on" position, the assigned output is turned off, and in the "off" position, it is turned on. Flashing: By assigning the flashing function to two outputs and the inverted switching function to one of the two outputs, a alternating flashing effect is created. The flashing frequency is set separately for each output. Dimming: To reduce the voltage at the output. Application example: The bulbs intended for analog operation in older vehicles can be dimmed and do not need to be replaced after the decoder is installed. Gradual dimming and brightening: for gradual increase or decrease.