
Not enough space for "GTA 6"? Here's how to upgrade your PS5 storage
"GTA 6" requires 212 gigabytes of storage space. Is your PS5 running low on space? I'll show you how to install an additional SSD.
The preload for «GTA 6» starts on November 10. That's when you can download Rockstar's next adventure so you're ready when the game is released on November 19.
The prerequisite is that you clear enough space on your Playstation 5. A whopping 212 gigabytes are required for it. Fortunately, the PS5 has an additional M.2 SSD slot. This allows you to expand your storage space by up to eight terabytes. The installation takes only a few minutes and can be done even by laypeople.
The process is very similar for all PS5 models. I am demonstrating it using the PS5 Pro. I also created a guide for the original PS5 five years ago.
Prerequisite for the SSD
First, choose a suitable SSD. The requirements are as follows:
| Schnittstelle | M.2 NVMe |
|---|---|
| Formfaktor | 2230, 2242, 2260, 2280, 22110 |
| Speicherplatz | 250 GB bis 8 Terabyte |
| Grösse, einschliesslich Kühlmechanismus | Breite: bis zu 25 mm
Länge: 30/40/60/80/110 mm Dicke: bis zu 11,25 mm |
You can find further details on the Playstation website.
For this guide, I am using the same WD Black SN850 that was already in my PS5. You can find models officially supported by Sony on this page.
Additional alternatives can be found at the following link.
SSD installation: remove the top cover, insert the SSD, done
For the installation, you only need a Phillips screwdriver in addition to your hands.
First, disconnect your PS5 Pro from the power. Then place it on its front so that the Playstation logo is not visible. The console consists of four separate side elements. Remove the smaller one located above the black ribs when viewed vertically. To do this, pull the plate upwards – viewed from the front of the console. The plates are clipped on, so it takes a bit of force. However, you don't have to pull really hard.
Once you have removed the side panel, you will see the SSD cover. Loosen the screw and remove the lid. Underneath, you will see the SSD slot. Depending on the size of your SSD, you may need to reposition the silver spacer for the screw.

Source: Philipp Rüegg
Insert the SSD into the slot until it is firmly seated. You will hear it click into place. Then you can see where the spacer needs to go.

Source: Philipp Rüegg
Screw the SSD tight, put the cover back on, and screw that down as well.
Now you can reattach the white plate. To do this, hook it in on the side where the SSD is located first. The cover has three white wings for this purpose, which in turn fit into three slots. Then you can fold the cover down and click it into place on the other side. You will hear a loud click when it is properly attached.

Source: Philipp Rüegg
That's it. Now you can start the PS5 Pro and fill the new storage space with games. Optionally, you can set in the system settings which media should be installed on which hard drive by default.

Source: Philipp Rüegg
Now you are equipped for the «Life of Crime» in «GTA 6».
This article was originally published on November 8, 2024 and has been updated for current events.
As a child, I wasn't allowed to have any consoles. It was only with the arrival of the family's 486 PC that the magical world of gaming opened up to me. Today, I'm overcompensating accordingly. Only a lack of time and money prevents me from trying out every game there is and decorating my shelf with rare retro consoles.
Interesting facts about products, behind-the-scenes looks at manufacturers and deep-dives on interesting people.
Show all











