Best Phobya products in the Thermal pads category
On this page you'll find a ranking of the best Phobya products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Phobya Thermal pad XT 120x20x1mm
Phobya's improved thermal pads with 7 W/mk are performance-wise on par with high-end thermal pastes. These "XT" thermal pads are excellently suited to compensate for height differences and irregularities on heatsinks and the components to be cooled. Their very good elastic pressure capability and low hardness allow for excellent adaptation to surfaces even with minimal pressure. They compensate for all large and small height differences, from microscopic grooves to visible irregularities. The surface of the pad is covered with a protective film that must be removed before use. These thermal pads can also be cut to the desired size. They are suitable for use with RAM coolers on graphics cards as well as for voltage regulators on motherboards. These thermal pads can even be used for large components such as the North or Southbridge, as they possess excellent thermal conductivity.
2. Phobya Thermal pad Ultra 100x100x2mm
These thermal pads are excellently suited for compensating for height differences and unevenness on heat sinks and the components to be cooled. Thanks to their very good elastic compressibility and low hardness, even a small amount of pressure achieves a very good adaptation to the surfaces. They compensate for all large and small height differences, from microscopic grooves to visible irregularities. The surface of the pad is slightly sticky and covered with a protective film that must be removed before installation. This slight adhesive property comes into play, preventing any slipping during the mounting of a heat sink. These thermal pads can also be cut to the desired size. They are suitable for use with RAM coolers on graphics cards as well as for voltage regulators on motherboards. Even for large components such as the North or Southbridge, these thermal adhesive pads can be used, as they possess excellent thermal conductivity. As a basic component or spare part, thermal pads belong in every well-organized computer hobbyist's workspace!
Technical details:
Color: gray
Dimensions: 100x100x2mm
Thermal conductivity: 5 W/mk
Maximum air gap to bridge: 2 mm
Electrically non-conductive
Delivery includes: 1x thermal pad 100x100x2mm (1 piece)
Note: These thermal pads can be compressed up to half their height.
3. Phobya Thermal pad Ultra 100x100x1mm
These thermal pads are excellently suited to compensate for height differences and irregularities on heat sinks and the components to be cooled. Due to their very good elastic compressibility and low hardness, even a small amount of pressure achieves a very good adaptation to the surfaces. All large and small height differences are compensated, from microscopic grooves to visible irregularities. The surface of the pad is slightly sticky and covered with a protective film that must be removed before installation. This slight adhesive property comes into play, preventing any slipping when mounting a heat sink. These thermal pads can also be cut to the desired size. They are suitable for use with RAM coolers on graphics cards as well as for voltage regulators on motherboards. Even for large components such as the Northbridge or Southbridge, these thermal adhesive pads can be used, as they possess excellent thermal conductivity. As a basic component or spare part, thermal pads belong in every well-organized computer hobbyist's workspace!
Technical details:
Color: gray
Dimensions: 100x100x1mm
Thermal conductivity: 5 W/mk
Maximum air gap to bridge: 1 mm
Electrically non-conductive
Delivery includes:
1x thermal pad 100x100x1mm (1 piece)
Note: These thermal pads can be compressed up to half their height.
4. Phobya Heat conduction pad Ultra
These thermal pads are excellent for compensating for height differences and unevenness on heat sinks and the components to be cooled. Due to their very good elastic compressibility and low hardness, a very good adaptation to the surfaces is achieved even with low pressure. They compensate for all large and small height differences, from microscopic grooves to visible irregularities. The surface of the pad is slightly sticky and covered with a protective film that must be removed before installation. Dimensions: 100 x 100 x 3 mm.
5. Phobya Thermal pad XT 120x20x1.5mm
These thermal conductive pads are excellently suited to compensate for height differences and unevenness on heat sinks and the elements to be cooled. Due to their very good elastic compressibility and low hardness, even a small amount of pressure achieves a very good adaptation to the surfaces. They compensate for all large and small height differences, from microscopic grooves to visible unevenness. Dimensions: 120 x 20 x 1.5 mm.
6. Phobya Thermal pad Ultra 15x15x3mm
These thermal conductive pads are excellently suited to compensate for height differences and irregularities on heat sinks and the components to be cooled. Due to their very good elastic compressibility and low hardness, even a small amount of pressure achieves a very good adaptation to the surfaces. They compensate for all large and small height differences, from microscopic grooves to visible irregularities. The surface of the pad is slightly sticky and covered with a protective film that must be removed before installation. Dimensions: 15x15x3 mm.
7. Phobya Thermal pad Ultra 30x30x0,5mm
These thermal pads are excellent for compensating for height differences and unevenness on heat sinks and the components to be cooled. Thanks to their very good elastic compressibility and low hardness, even a small amount of pressure achieves a very good adaptation to the surfaces. They compensate for all large and small height differences, from microscopic grooves to visible irregularities. The surface of the pad is slightly sticky and covered with a protective film that must be removed before installation. This slight adhesive property comes into play, preventing any slipping when mounting a heat sink. These thermal pads can also be cut to the desired size. They are suitable for use with RAM coolers on graphics cards as well as for voltage regulators on motherboards. Even for large components such as the Northbridge or Southbridge, these thermal adhesive pads can be used due to their excellent thermal conductivity. As a fundamental component or spare part, thermal pads belong in every well-organized computer hobbyist's workspace!
Technical details:
Color: gray
Dimensions: 30x30x0.5mm
Thermal conductivity: 5 W/mk
Maximum air gap to bridge: 0.5 mm
Electrically non-conductive
Delivery includes: 1x thermal pad 30x30x0.5mm (1 piece)
Note: These thermal pads can be compressed up to half their height. This product has been tested for you: Freeocen.
8. Phobya Thermal Pad Ultra
Due to their excellent elastic compressibility and low hardness, these thermal pads achieve a very good adaptation to surfaces with minimal pressure. They compensate for all large and small height differences, from microscopic grooves to visible unevenness. The surface of the pad is slightly sticky and covered with a protective film that must be removed before installation. This slight adhesive property comes into play, preventing slipping during the mounting of a heatsink. These thermal pads can naturally be cut to the desired size. They are suitable for use with RAM coolers on graphics cards as well as for voltage regulators on motherboards. These thermal adhesive pads can even be used for large components such as the North or Southbridge, as they possess excellent thermal conductivity.
9. Phobya Thermal pad Ultra 30x30x1.5mm
These thermal pads are ideally suited to compensate for height differences and unevenness on heat sinks and the components to be cooled. Due to their excellent elastic compressibility and low hardness, even a small amount of pressure achieves a very good adaptation to the surfaces. They compensate for all large and small height differences, from microscopic grooves to visible irregularities. The surface of the pad is slightly sticky and covered with a protective film that must be removed before installation. This slight adhesive property comes into play, preventing any slipping during the mounting of a heat sink. These thermal pads can also be cut to the desired size. They are suitable for use with RAM coolers on graphics cards as well as for voltage regulators on motherboards. Even for large components such as the North or Southbridge, these thermal adhesive pads can be used due to their excellent thermal conductivity. As a basic component or spare part, thermal pads belong in every well-organized computer workshop!
Technical details:
Color: gray
Dimensions: 30x30x1.5mm
Thermal conductivity: 5 W/mk
Maximum air gap to bridge: 1.5 mm
Electrically non-conductive
Delivery includes:
1x Thermal Pad Ultra 5W/mk 30x30x1.5mm (1 piece)
Note: These thermal pads can be compressed up to half their height.
10. Phobya Heat conduction pad Ultra
These thermal pads are excellently suited to compensate for height differences and irregularities on heat sinks and the elements to be cooled. Due to their very good elastic compressibility and low hardness, even a small amount of pressure achieves a very good adaptation to the surfaces. They compensate for all large and small height differences, from microscopic grooves to visible irregularities. The surface of the pad is slightly sticky and covered with a protective film that must be removed before installation. Dimensions: 30x30x3mm.
