Solvent-free two-component adhesive based on epoxy resin for high loads. The processing time is up to 90 minutes, with curing time and final strength being temperature-dependent. It becomes solid after 12 hours at room temperature. The adhesive bond is impact-resistant, aging-resistant, and moisture-resistant. It is also available in a user-friendly double-chamber syringe that allows for easy application of the two components in the correct mixing ratio.

Materials: Bonds metals, glass, porcelain, ceramics, wood, marble, stone, concrete, thermosetting plastics, fiberglass-reinforced plastics, rigid PVC, rubber, and rigid foams such as Styrofoam. Not suitable for bonding large glass surfaces, polyethylene, or polypropylene.

Processing/Application Instructions: The bonding surfaces must be dry and free from dust and grease. Roughen smooth surfaces. Mix binder and hardener in a 1:1 ratio (strands of equal length). Apply adhesive on one side or both sides for rough materials. Fit parts together precisely without pressure. The working time (pot life) is approximately 90 minutes. Curing time and final strength depend on temperature, with strength being reached at room temperature in about 12 to 24 hours.

Temperature Curing Strength:

• 20 °C: 12 hours, 1200 N/cm²
• 40 °C: 3 hours, 1800 N/cm²
• 70 °C: 45 minutes, 2000 N/cm²
• 100 °C: 10 minutes, 2500 N/cm²
• 180 °C: 5 minutes, 3000 N/cm².