EUR290,80
Nuki Smart Lock PRO (5th Gen) EU cylinder
Electronic numerical code, Smartphone
Questions about Nuki Smart Lock PRO (5th Gen) EU cylinder
What would you like to know?
0 questions and answers
Helpful answer
Unfortunately, you would have to tell the manufacturer directly. However, we can understand the objection.
Helpful answer
I have just fitted the Nuki to my door with a Kaba knob -> it works (without an adapter, the "slot" for the key is the right size directly)
Former employee
8 months ago
This should not be the case and we sell this item regularly. This CH version is not only sold by us, but also by some of the other largest suppliers in Switzerland.
Please contact our Galaxus Assistant in this regard so that we can help you individually with your request: https://www.galaxus.ch/help
Helpful answer
Yes, you have to remove the rotary knob and order and use the corresponding adapter
Hello
The trap can also be retracted, but it only remains in the retracted position for one metre so that the door can be opened.
you have to change the lock and install one with a priority function. you may actually be locked out. you must also have your key with you🙂
Galaxus
1 month ago
Yes, it is compatible with a CH rotary knob lock using a specific adaptor available for this type of cylinder. This adapter can be used with cylinders such as Keso or DOM with knob, according to user feedback and the Nuki compatibility guide. Check the exact compatibility of your cylinder via the Nuki app to confirm the key protrusion and thickness (≤4 mm, protrusion ≤37 mm).
Automatically generated from the .This lock only works with the key.
For the rotary knob, you need the "Smart Lock GO CH" variant plus the "red" adapter
Galaxus
1 month ago
Helpful answer
Hello,
No, the Smart Lock PRO (5th Gen) Cylindre CH (Smartphone) is not compatible with a Keso lock equipped with a rotary knob inside. It requires a key inserted in the cylinder and does not work with a rotary knob.
To check the exact compatibility of your cylinder, use the official Nuki tool via their app or website. If you have more details about your model, our community can help you further.
Automatically generated from the . Helpful answer
You need a Nuki Smart Lock Go
Galaxus
2 months ago
Helpful answer
No, the Smart Lock Pro (5th Gen) is not compatible with a door knob. It requires an inserted key in the cylinder and is no longer compatible with knob cylinders, unlike previous generations. Adapters are available for knob cylinders, but these do not fit the new model due to the compact design. If you have a door knob, I recommend the compatibility check on the Nuki website or the Smart Lock Ultra.
Automatically generated from the .Galaxus
2 months ago
Yes, the model works with knob cylinders, but the knob must be removed. For compatibility, you need a suitable Nuki adapter, which serves as a connection between the knob cylinder and the Smart Lock. Nuki offers adapters for various knob cylinder manufacturers such as EVVA, CES, Cisa, Abus, Keso, Dormakaba, Winkhaus, Dom, Nemef, Yale and M&C.
Automatically generated from the .
Galaxus
2 months ago
Helpful answer
No, it is not necessary to drill holes in the frame to fix the Nuki knob.
The lock is mounted on the inside of the door using the existing cylinder and mounting plate (clamp or adhesive), thus without additional holes in the frame.
Automatically generated from the .
Helpful answer
No, the nuki pro 5 no longer works with the yellow Kaba adapter... It only has one slot. But there are suppliers who make a suitable adapter from a 3D printer. But I have it myself with a key
No, unfortunately it doesn't fit. Unfortunately, I had to return it for exactly the same reason and switch to the Nuki Go.
Galaxus
3 months ago
Yes, the product fits a Swiss Keso lock with a special red adapter. Whether inside with key or knob, it works with knob cylinders like Keso, but check the cylinder overhang (<6 mm) and key width (≤4 mm). Compatibility with older adapters is not guaranteed for the 5th generation, use the Nuki compatibility check.
Automatically generated from the .
Helpful answer
yes, you can either use MQTT directly, or Matter. then it's a question of what you call a bridge.
Galaxus
4 months ago
The key still works from the other side when the lock is installed, as the Smart Lock PRO (5th Gen) CH cylinder is compatible with existing cylinders that have an emergency and danger function, allowing manual key operation from the outside even when the smart lock is installed on the inside.
However, compatibility issues can arise with certain knob cylinders (e.g., KABA or KESO rotary knob systems), where adapters may be required or the key function may be limited or not work properly without changing the cylinder. For standard Euro profile cylinders with emergency and danger function, the key remains usable from the outside side.
Automatically generated from the .
As we do not have an effective user experience, we have forwarded your question to the Community so that it may be answered by another customer.
As we do not have an effective user experience, we have forwarded your question to the Community so that it may be answered by another customer.
Helpful answer
No, it will not open in this case because you are already in the defined zone.
Helpful answer
Yes, that's exactly how the NUKI works.
Helpful answer
Charged on Tuesday lunchtime. With night mode, about 10 closures per day. Battery level still at 100%
Hey,
I had ordered the lock, I have a Keso system with a rotary knob.
I then bought a self-printed adapter (of good quality) on Etsy, but even with this it couldn't be installed because the distance was too great and the lock could no longer be pushed up to the door.
If you really want to be sure, take the 4th generation, which has been proven to work with a rotary knob...
Helpful answer
I've had the Nuki Pro with adhesive mounting for about a month now.
So far it has held perfectly and makes a very solid impression!
However, I haven't set it to the super fast closing mode. But I don't think that should be a problem either.
Helpful answer
I already had a door sensor with the old version. This can still be used.
Galaxus
6 months ago
Helpful answer
You can only pair one Keypad per Nuki Smart Lock; it is not possible to connect one Keypad to multiple Smart Locks. The Keypad is therefore always connected one-to-one with a single Smart Lock.
Automatically generated from the .
Helpful answer
I don't have a photo. The yellow hexagonal adapter didn't work for me either. I then "enlarged" the knob cylinder with a few layers of paper tape and now it works perfectly, as long as I don't want to double lock it. It does work with double locking, but I always get an error message.
30 of 54 questions