Best selling Energy monitors from NZR
On this page you’ll find a ranking of the best Energy monitors from NZR. To give you a quick overview, we’ve added the most important product details. This page always stays fresh and updates automatically.
1. NZR Three-phase meter reg DS10(60)A-GEE ** 3x230/400V 10(60)A 1002021
The NZR three-phase meter reg DS10(60)A-GEE is a mechanical electricity meter designed for direct connection. The meter is designed for voltages of 3x230/400V and currents of up to 60A. It is approved for mounting on meter crosses in accordance with DIN 43857 and has PTB approval. The temperature range for operation extends from -10 to +45 °C, making it suitable for various environments. The meter has a protection rating of IP 51, which protects it from dust and splash water.
2. NZR 59320419
The DHZ+ is a digital single-rate electricity meter specifically designed for use in 4-wire three-phase networks. It allows for precise measurement of both positive and negative active energy as well as reactive energy. Equipped with a variety of functions, the meter provides a comprehensive display of energy values, instantaneous values, and power factors. Installation is straightforward on a DIN rail, making it a practical choice for various applications. The DHZ+ features an M-BUS interface that enables easy integration into existing systems. Additionally, it has two S0 pulse outputs that ensure flexible data transmission. The EC type examination certificate according to Directive 2004/22/EC (MID) confirms the device's compliance with applicable standards. The meter is designed for a maximum current of 80 Amperes and offers a digital display for user-friendly operation.
- Digital single-rate meter for 4-wire three-phase networks
- M-BUS interface for easy system integration
- Two S0 pulse outputs in OptoMOSFET design
- EC type examination certificate according to MID directive
- Adjustable transformer ratio for flexible applications.
3. NZR 47320218
The DHZ+ is a digital single-rate meter specifically designed for the precise measurement of positive and negative active energy in 4-wire networks. This digital three-phase meter allows for direct measurement and features a comprehensive display that shows various parameters such as energy value, power, voltage, current, instantaneous values, power factor, and frequency. User-friendly operation is supported by a button for display switching and device parameterization. The meter is equipped with installation error detection and has an OptoMOSFET output that complies with the S0 specification. Installation is done on a mounting rail according to EN 50022 (TS 35). The DHZ+ meets the requirements of the EC type examination certificate for active energy according to Directive 2004/22/EC (MID).
- Digital single-rate meter for 4-wire networks
- Energy and power parameters are displayed on a 3-line, 8-digit LCD
- Adjustable pulse weight from 1 to 100,000 pulses/kWh
- Installation error detection to ensure operational safety
- Temperature range of -25 to +55 °C for versatile applications.
4. NZR Load profile
The Load Profile Multi-Tariff MID from NZR is a highly advanced energy measuring device specifically designed for the precise measurement of active and reactive energy in 3- and 4-wire networks. Equipped with a multi-power supply, it supports voltages from 3 x 58/100V to 3 x 240/412V and currents of 1(6)A. The digital three-phase meter offers comprehensive real-time measurement of current, voltage, power, frequency, and power factor. Internal control is managed by a real-time clock with battery backup, while external tariff controls are possible via an S0 input. The device features various communication interfaces, including D0, S0, and RS485 outputs, allowing for easy integration into existing systems. With a robust housing and an IP20 protection rating, the load profile is suitable for use in various environments.
- 4-quadrant meter for active and reactive energy measurement
- Real-time clock with battery backup for reliable timekeeping
- Expandable communication interfaces for flexible integration
- High accuracy: 1% for active energy, 2% for reactive energy
- Multi-tariff functionality for different billing models.
5. NZR SEM 16+ Energy Monitor
The NZR Standby Energy Monitor SEM 16+ is an electronic power meter specifically designed to monitor the energy consumption of individual electrical devices in households. With a maximum current of 16 Amperes and a nominal voltage of 230 Volts, this device allows for precise measurement of electricity costs. The SEM 16+ is easy to use: after plugging in the device to be measured, it automatically begins a 24-hour measurement. Upon completion of the measurement, the results, including energy consumption and energy costs, are displayed on the digital screen. The measurement duration can be flexibly set to 1, 7, or 30 days, and the option to manually start and stop the measurement provides additional control. The monitor is designed as a plug-in device and has an IP20 protection rating, making it suitable for indoor use.
- Automatic 24-hour measurement of energy consumption
- Adjustable measurement duration of 1, 7, or 30 days
- Digital display of energy costs and consumption
- Easy handling due to plug-in design
- Suitable for use in households with a maximum power of 3680 Watts.
6. NZR 59320418
The DHZ+, single-rate, direct-reading three-phase meter in a 4-quadrant design with M-Bus and 2xS0 impulses, MID is a digital single-rate meter for the 4-wire three-phase network for both supply and consumption, as well as active and reactive energy, featuring a 2xS0 pulse output for rail mounting. It is a digital single-rate meter for measuring positive (consumption) and negative (supply) active energy and reactive energy in 4-wire networks. Digital three-phase meter for direct measurement. Display shows energy value, display test, pulse constant, pulse length, power, voltage, current, instantaneous values, power factor, and frequency. Operating button for display switching and device parameterization, installation error detection, 2 x pulse output in OptoMOSFET design, max. 250V AC/DC 100mA (complies with S0 specification) kWh, pulse factor and pulse length adjustable, mounting on DIN rail according to EN 50022 (TS 35). EC type examination certificate for active energy according to Directive 2004/22/EC (MID = Measurement Instruments Directive). Attention! Changes to the pulse outputs are only possible once after installation for calibrated/MID-compliant meters. The meter must then be locked by the meter user. This DHZ+ meter series is also available in other versions, such as for systems in 2-wire / 3-wire / 4-wire and voltages (U) like 1 x 230 V, 3 x 100 V, 3 x 230 V, 3 x 400 V, 3 x 500 V, 3 x 58 / 100 V, and with various other interfaces. Please inquire about the corresponding article number at the factory. Technical data: 4-wire system, voltage (U) 3x230/400V, current (I) 5(80)A, in 4-quadrant design, frequency (f) 50 Hz, display 3-line.
7. NZR 43420418
Three-phase meter EcoCount SL 85A, M-BUS, 0.25-585A, MID conformity assessed for delivery and consumption. The EcoCount SL meter in direct measurement design is a fully electronic electricity meter for permanent installation in three-phase four-wire networks or single-phase two-wire networks, intended to measure active electrical energy and register it in up to two energy tariffs. It is an indoor meter designed as a built-in device for mounting on DIN rails in a compact design of only one modular unit. The meter features a backlit display, menu navigation via two control buttons, and displays active, reactive, and apparent power, power factor, voltage, network frequency, and current for both total and per phase. Alarm functionality with parameterizable thresholds, tariff switching, reading, resettable meter register, phase failure detection, rotation field detection, reverse flow prevention, bidirectional meter, delivery and consumption, conformity assessment according to MID. The display capacity dynamically adjusts to consumption. Initially, it shows 5.3 for whole and decimal places. As consumption increases, the decimal point shifts up to the representation of 8.0, modular units, M-BUS, and S0 pulse output, future-proof with expansion interface and additional functions via EcoCount SL 85 MID M-Bus modules.
8. NZR Alternating current meter
NZR Alternating current meter NORAX 1D+ Manufacturer: NZR Name: Alternating current meter mME WS max.60A Type: NORAX 1D+ Meter type: electronic Rated current (In): 5 A Maximum current (Imax): 60 A Frequency: 50 Hz Accuracy class: B Pole type: 1-phase Design: direct measurement Energy type: active power Suitable for: Purchase/delivery Tariff type: dual tariff Pulse rate: 10000 Imp/kWh (kvarh) Display type: digital Mounting type: surface-mounted Interface type: other Protection class (IP): IP51NZR Alternating current meter NORAX 1D+: more detailsMID, delivery and purchase, DT , EAN: 4048652103751.
9. NZR Communication module
The KNX bus is widely used in the control of home and building system technology. The SL-E KNX expansion module is used to connect the EcoCount SL energy meter to the KNX bus. The IR (infrared) interface located on the left side of the SL-E expansion module is intended for connecting the EcoCount SL generation electricity meters. All values available on the measuring device can be transmitted via the KNX bus. Power is supplied directly through the KNX bus, so only the bus cable (a standardized cable) needs to be connected. The interface features an ETS user program that allows for function configuration. For quick installation, the module can also be integrated without the ETS and is KNX quick capable. If needed, the device can also be operated with KNX SECURE. With the product database EcoCount SL-E_KNX.knxprod, it is possible to configure the EcoCount SL-E KNX expansion module.
10. NZR 59320404
The NZR energy meter is a digital single-rate meter specifically designed for use in 3-wire three-phase networks. It enables precise measurement of both positive and negative active energy as well as reactive energy. Equipped with a variety of features, the device offers a comprehensive display of energy values, instantaneous values, power factor, and frequency. Installation is straightforward on a DIN rail, facilitating integration into existing systems. The meter is equipped with an M-BUS interface that allows for easy data transmission. Additionally, it has two S0 pulse outputs that comply with the S0 specification. The ability to parameterize and the EC type examination certificate according to Directive 2004/22/EC (MID) ensure adherence to high standards in energy monitoring.
- Digital single-rate meter for 3-wire three-phase networks
- M-BUS interface for easy data transmission
- Two S0 pulse outputs in OptoMOSFET design
- Adjustable transformer ratio and pulse factor
- EC type examination certificate according to MID directive.
Product order
See all products