Flooring accessories
−69%
only 2 of 2 remaining on sale
EUR2,87 was EUR9,17
wolfcraft wolfcraft 1 Schlagholz
Best wolfcraft products in the Flooring accessories category
On this page you'll find a ranking of the best wolfcraft products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. wolfcraft wolfcraft 1 Schlagholz
The tapping block is an indispensable aid for laying parquet and laminate flooring evenly and without joints. Simply place it on the front of the plank and compact the material with a targeted hammer blow on the tapping surface. The tapping block is equipped with a special longitudinal profile that is suitable for any plank thickness so that you can optimally protect the tongue and groove when compacting.
2. wolfcraft wolfcraft 1 Zugeisen 310x15x25mm
The pulling tool is perfect for aligning and seamlessly adjusting rows of laminate flooring. Thanks to the three felt glides on the underside, the surface is protected from scratches and gentle use is guaranteed. The hooked edge ensures a secure hold on the edge of the plank, while you can use the hammer safely on the sturdy striking surface. Made from sturdy metal and high quality "Made in Europe", the pull hammer also impresses with its long service life.
3. wolfcraft wolfcraft 1 Laminat- / Designboden Einpass Set
The practical success package "Fitting Laminate and Design Flooring" from wolfcraft includes everything you need for the precise fitting of laminate and design floors. It contains the universal angle, the contour gauge, and the laminate fitting tool. The universal angle comes into play at the end of the first row. With it, you can measure the correct length for the last plank and transfer it to the flooring material. To do this, align the universal angle at the edge. Using the stop, you can now mark the 90° cutting line. Thanks to the integrated rows of holes and scales, the universal angle is also ideal for transferring rectangular cutouts.
If you want to measure special cutouts like heating pipes cleanly and transfer them accurately to the plank, the contour gauge is indispensable. It was specifically designed for tracing and transferring cutting lines. With 91 fine probing pins, you can replicate contours with a width of up to 130 mm and a depth of up to 30 mm. After fixing it with the locking lever, this traced contour remains reliably intact, allowing you to transfer it effortlessly in the next step. The contour gauge even enables you to precisely capture complicated profiles and transfer them to another workpiece. Measurement errors and inaccuracies are a thing of the past.
With the laminate fitting tool, you can mark the last plank when laying flooring for precise cutting. The stop, sliding wheels, and spring-loaded sliding elements make it easy for you to transfer measurements accurately. In doing so, you not only take into account the exact wall alignment but also automatically include the expansion gap. This eliminates measurement errors from the outset. With a large clamping width of up to 235 mm, you can use the laminate fitting tool with almost any wooden flooring.
4. wolfcraft wolfcraft 40 Abstandskeile 58x30mm
The robust plastic wedges are indispensable when setting up expansion joints, e.g. when laying laminate, parquet or vinyl flooring. The material thickness of the wedges ranges from 1 to 6 mm. If you want to realise larger distances, you can combine several wedges. The ribbed surfaces ensure optimum grip.
5. wolfcraft wolfcraft 1 LC 100 - Laminatschneider
With the LC 100 laminate cutter, you are well equipped for simple laminate laying work. You can use it to cut laminate planks up to a thickness of 8 mm and a width of 210 mm quietly, power-free and without dust - ideal for cutting directly at the installation site. With the 90° stop and the special blade geometry, you can achieve precise, safe cuts without any great effort. The ergonomically shaped handle and the anti-slip buffers under the sturdy support feet offer you optimum handling. Thanks to the torsion-resistant construction made of high-quality aluminium profiles, the laminate cutter weighs just 1.7 kg and is therefore easy to transport. The ideal alternative to employees using cross-cut or jigsaws.
6. wolfcraft wolfcraft 1 Schienen-Verlängerung für 4014000
The rail extension is the ideal accessory for your plasterboard cutter with rail (item 4014000) if you want to master cutting lengths of up to 1.90 metres. It enables you to achieve clean, precise cutting edges across the entire board. The clean edges make subsequent levelling and sanding work much easier. The extension rail is made from high-quality, torsion-resistant aluminium profiles and can be easily attached to the rail of your existing plasterboard cutter. This allows you to adjust the running length quickly and easily.
7. wolfcraft wolfcraft 1 TC 460 - Fliesenschneider
The TC 460 is the ideal project partner for laying smaller tile formats. With the tungsten carbide cutting wheel, you can effortlessly cut tiles up to a length of 460 mm and a material thickness of 4-10 mm. Thanks to plastic plain bearings, oval rails and 2 tapered tips, you benefit from an easy cutting process with a clear view of the cutting guide. You can then easily break the tile without changing position using 2 tapered tips positioned at 45 and 90°. The guide rails with an angle stop of up to 45° for repeat and diagonal cuts are included in the scope of delivery. With its aluminium profile base plate, the tile cutter is a real lightweight at 1.7 kg, yet stable and torsion-resistant. This allows you the best precision and easy transport of the cutter. For wider tiles, use the 2 material supports supplied, which you simply attach to the base plate. The TC 460 can be used comfortably by left or right-handed users.
8. wolfcraft wolfcraft 1 TC 670 - Fliesenschneider Expert
The TC 670 Expert is a stable, precise tile cutter that is ideal for ceramic tiles and porcelain stoneware with a cutting length of up to 67 cm. The highlight? Once set, it delivers perfect cuts in series. There is no need to cut by feel when employees are working with the TC 670 Expert. The correct contact pressure is set once to the tile thickness of 4-14 mm. The pressure remains constant during the entire scoring process and guarantees you a clean break. Series cuts with consistent results from the first to the last tile are guaranteed. Thanks to its innovative mechanics and precise guidance through grooved ball bearings and C-profile rails, you can score and break the tile in a single pass with virtually no effort. The low-maintenance and precise guide with grooved ball bearings and C-profile rails allows you to guide the cutting wheel made of solid tungsten carbide over the tile with one hand. The tile can now be broken without having to change the position of the plate again. The TC 670 Expert has an integrated breaking cone with lever transmission. Simply press down the lever of the ergonomically shaped comfort handle - and you're done. Also included in the scope of delivery: a special guide with which diagonal cuts can also be carried out precisely.
9. wolfcraft wolfcraft 1 TC 600 - Fliesenschneider
The TC 600 is the ideal project partner for laying smaller tile formats. With the tungsten carbide cutting wheel, you can cut tiles up to a length of 600 mm and a material thickness of 4-10 mm. Thanks to plastic plain bearings, oval rails and 2 tapered tips, you benefit from an easy cutting process with a clear view of the cutting guide. You can then easily break the tile without changing position using 2 tapered tips positioned at 45 and 90°. The guide rails with an angle stop of up to 45° for repeat and diagonal cuts are included in the scope of delivery. With its aluminium profile base plate, the tile cutter is a real lightweight at 2.1 kg, yet stable and torsion-resistant. This allows you the best precision and easy transport of the cutter. For wider tiles, use the 2 material supports supplied, which you simply attach to the base plate. The TC 600 can be used comfortably by left or right-handed users.
10. wolfcraft wolfcraft 1 Profi-Zugeisen mit Amboss 440x120x60mm
The PRO pulling tool with integrated anvil is ideal for high-quality laminate or parquet work where effective surface protection is important. The large felt coating on the underside virtually eliminates scratches and damage caused by contact with the pull bar. The 12 cm pulling surface ensures even force transmission, which protects the tongue and groove. The PRO pull bar is particularly useful in the last row of laminate. The contact surface also fits into a narrow joint of up to 5 mm between the wall and the material already laid. With a controlled hammer blow on the integrated anvil, you can also achieve effective compaction in the last rows of laminate or parquet or push the material neatly under a door frame.
