Best selling Surge protection from Schneider Electric
On this page you'll find a ranking of the best Schneider Electric products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Schneider Electric iQuick PRD40r ÜSS
The iQuick PRD40r surge protector from Schneider Electric is a highly advanced protection device specifically designed for use in low-voltage consumer installations. With its 3-pole design and a maximum discharge surge current of 40 kA, this Type 2 surge protector provides effective protection against transient overvoltages that may be caused by lightning strikes or other electrical disturbances. The plug-in protection modules allow for easy installation and maintenance, while the integrated pre-fuse ensures additional protection for connected equipment. The iQuick PRD40r is suitable for mounting on a DIN rail and meets high safety standards, making it a reliable choice for protecting electrical systems.
- Maximum discharge surge current of 40 kA
- Type 2 surge protection for low-voltage consumer installations
- Easy installation with plug-in protection modules
- Integrated pre-fuse for additional protection.
2. Schneider Electric iPRD65r modular
The iPRD65r modular surge protector from Schneider Electric offers effective protection against surges in electrical installations. With a maximum lightning impulse current capacity of 65 kA and a nominal discharge surge current of 20 A, this device ensures reliable safeguarding of electrical devices and systems. The surge protector is designed for mounting on a DIN rail and features plug-in protection modules that allow for easy maintenance and replacement. The IP20 protection rating ensures that the device is suitable for use in dry indoor environments. The iPRD65r is a Type 2 surge protector specifically developed for use in residential and commercial buildings to enhance the safety and longevity of electrical systems.
- 2-pole with plug-in protection modules
- Maximum lightning impulse current of 65 kA
- Nominal voltage of 350 V
- Mounting on DIN rail.
3. Schneider Electric iPRDDC 40r 800pV
The iPRDDC 40r 800pV from Schneider Electric is a highly advanced surge protector specifically designed for the protection of DC inputs to inverters and solar panels. With a maximum continuous voltage of 800V and a maximum discharge current of 40kA, this device provides effective protection against surges caused by lightning strikes. The surge protector belongs to the Type 2 test class and is suitable for mounting on a DIN rail. It is equipped with a remote signaling contact that allows for easy monitoring and alerting. The iPRDDC 40r 800pV is a reliable component in electrical infrastructure that helps extend the lifespan of electrical devices and enhance their safety.
- Type 2 surge protector for DC applications
- Maximum discharge current of 40kA
- Remote signaling contact for monitoring purposes
- DIN rail mounting for easy installation.
4. Schneider Electric iQuick PRD8r ÜSS
The iQuick PRD8r surge protector from Schneider Electric is a reliable solution for protecting low-voltage consumer systems and equipment from transient overvoltages. This device is designed as a pluggable protection module and offers easy installation on a DIN rail. With a maximum discharge capacity of 8 kA and classified as Type 2, the iQuick PRD8r is ideal for use in end-user applications. The integrated pre-fuse provides additional safety and protection. The surge protector is designed for a nominal voltage of 230 V and offers a protection level of 2.5 V, making it an effective choice for safeguarding sensitive electrical devices. The IP20 protection rating ensures that the device is suitable for indoor use.
- Pluggable protection modules for easy installation
- Maximum discharge surge current of 8 kA
- Integrated pre-fuse for additional protection
- Protection level of 2.5 V for sensitive devices.
5. Schneider Electric iPRD8r modular
Surge arrester Acti 9 iPRD8r, plug-in protection modules. 3-pole + N, 8 kA secondary protection, Type 3. It is installed near the loads to be protected when they are more than 10 m away from the previously installed surge arrester. Surge arresters with index R in the type designation are equipped with remote signaling contacts.
6. Schneider Electric Replacement protection module
The replacement protection module from Schneider Electric is a highly advanced surge protection device specifically designed for use with combination surge arresters of types iPRD1 F25r 3P/3P+N. It offers comprehensive protection against surges and features an integrated fuse that ensures reliable functionality. The optical function and fault indication allows for easy monitoring of the device's status, with green and red indicators clearly signaling the operational state. With a rated voltage of 240 V AC and a maximum discharge current capacity of up to 65 kA, this module is suitable for demanding applications. It meets international standards IEC 61643-11:2011 and EN 61643-11:2012+A11:2018, underscoring its reliability and safety. The module is designed for an operating temperature range of -40 to +85 degrees Celsius, providing high flexibility in various environments.
- Integrated fuse for additional protection
- Optical function and fault indication
- Maximum discharge current of 65 kA
- Operating temperature range of -40 to +85 degrees Celsius
- Complies with international safety standards (IEC 61643-11).
7. Schneider Electric SCHN combined arrester
The SCHN combination surge arrester from Schneider Electric is a modular surge protection device designed for use in lightning protection classes I and II. This device features an integrated fuse, eliminating the need for an additional arrester pre-fuse. With a remote contact and optical function and fault indication, the combination arrester allows for easy monitoring of the device's status. It is suitable for TN-C networks and offers a nominal voltage of 240 V AC at a frequency of 50/60 Hz. The combination arrester ensures high protection against surges with a maximum discharge current of 65 kA and a protection level of 1.5 kV. Installation is straightforward on a DIN rail, facilitating its use in various applications. With an operating temperature range of -40 to +85 degrees Celsius, the device is suitable for a wide range of environments and complies with the standards IEC 61643-11:2011 and EN 61643-11:2012+A11:2018.
- Integrated fuse, no arrester pre-fuse required
- Optical function and fault indication
- Suitable for TN-C networks
- Operating temperature range of -40 to +85 degrees Celsius
- Complies with international surge protection standards.
8. Schneider Electric Skip Trap
The surge protector from Schneider Electric, model A9L40321, is a reliable protection device specifically designed for use in electrical installations. This device provides effective protection against surges caused by lightning strikes or other electrical disturbances. The surge protector is classified as Type 2 and features plug-in protection modules that allow for easy maintenance and replacement. With a maximum discharge current capacity of 40 kA, it can safely divert high surges, thereby protecting connected devices. The surge protector is designed for use in three-phase systems and additionally offers a remote signaling contact that enables monitoring of the device's status. Its compact design facilitates installation in various applications.
- Type 2 surge protector with plug-in protection modules
- Maximum discharge current of 40 kA
- Three-phase design for comprehensive protection
- Integrated remote signaling contact for status monitoring.
9. Schneider Electric Circuit module, varistor, 110-250V LA4DE2U
Schneider Electric overvoltage limiter LA4DE2U
Manufacturer: Schneider Electric
Designation: Overvoltage limiter
Varistor: 110-250 VAC/DC
Type: LA4DE2U
Function: Varistor
Rated control supply voltage Us at AC 50 Hz: 110-250 V
Rated control supply voltage Us at AC 60 Hz: 110-250 V
Voltage type for actuation: AC
With LED display: No
Schneider Electric overvoltage limiter LA4DE2U is a circuit module varistor for LC1D40-95. It features actuation voltage of 110-250 V AC, and uses screw fixing. The voltage limitation is to a maximum of 2 Uc, providing maximum reduction of overvoltage peaks. It has a low tripping delay of 1.1-1.5 times the normal time.
EAN: 3389110233124.
10. Schneider Electric Combination arrestor PRD1 25R 1P Type1
The PRD1 25R 1P Type 1 combined surge arrester from Schneider Electric is a highly advanced device specifically designed for surge protection in low-voltage systems. With a nominal voltage of 230V and a maximum continuous operating voltage (Uc) of 350V, this combined arrester provides reliable protection against transient overvoltages. It belongs to the surge arrester class Type 1+2 and can handle a nominal discharge current of 25kA. The installation takes place at the supply point of the electrical system, ensuring effective protection against lightning strikes and other overvoltages. The pluggable protection modules of the PRD1 series allow for easy maintenance and replacement, making the device user-friendly. The combined arrester meets the standards IEC 61643-1 and EN 61643-11, underscoring its reliability and safety.
- Surge protection class Type 1+2 for comprehensive protection
- Nominal discharge current of 25kA for high durability
- Easy installation on DIN rail
- Pluggable protection modules for straightforward maintenance
- Complies with international standards IEC 61643-1 and EN 61643-11.
Product order
See all products