Best Festool products in the Vices + Clamps category
On this page you'll find a ranking of the best Festool products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Festool FS-EZ 150/2 Einhandzwinge
Multifunctional: Usable for clamping, over-clamping, and spreading. Time-saving: One-handed operation makes it easier to clamp the guide rail or workpiece. Comfortable: Ergonomic pump lever with an integrated release lever for easy operation and quick access from both directions. Safe: The plastic protective cap ensures slip-resistant and gentle fixing. Compatible: Fits the clamping groove of all guide rails/MFT 3/Mobile Workshop. Maximum flexibility, minimal effort: This one-handed clamp offers versatile applications for your work projects. Whether clamping, over-clamping, or spreading, the tool-free conversion function allows you to adapt the clamp flexibly to your application. In addition to a clamping range of up to 150 mm and a spreading range of 120-310 mm, the clamp also integrates seamlessly into the Festool system. Effortlessly, you can securely fix your guide rail or clamp a workpiece into the side groove of the multifunction table MFT, allowing you to work precisely and with control at all times.
2. Festool MFT-SP
Clamping elements MFT-SP for MFT 3 and mobile workshop MW 1000. for SYS-MFT. The MFT-SP clamping elements provide a secure hold for round and square workpieces without slipping. Thanks to their compatibility with the MFT perforation, they can be easily attached to a multifunctional table or the mobile workshop. Thanks to the horizontal fixation, the entire surface of the workpiece can be machined. Round workpieces are also securely clamped on the MFT. The counter bearings can also be used as contact points for working. The clamping lever makes clamping and releasing quick and easy with just one hand. Rubberised contact surfaces prevent the workpieces from slipping and protect sensitive surfaces. For secure and precise fixing of the workpiece, sawing, grinding, milling, drilling.
3. Festool Fs-Hz 160
Thanks to the lever mechanism, it is up to five times faster to clamp than screw clamps. The lever clamp is resistant to vibrations, making it particularly suitable for applications in machine environments. The one-handed operation makes it easier to clamp guide rails or workpieces. Perfectly coordinated with the Festool system and the clamping groove on the guide rail, the multifunction table MFT, and the machine. The Festool clamps fit perfectly into the system and can be used in a variety of ways. Whether for securely clamping guide rails, clamping workpieces on the multifunction table MFT or the mobile workshop, or securely attaching sections on semi-stationary saws like the CS S50/70 or the KS/KSC 60, they provide the necessary support everywhere.
4. Festool Schraubzwinge FSZ 300
Perfectly tailored to the Festool system and the clamping groove on the guide rail, MFT, and machine. Very robust and durable due to the all-steel construction. The handle is ergonomically shaped and made of wood. The soft protective cap ensures slip-resistant and gentle fixing. The Festool clamps fit perfectly into the system and can be used in a variety of ways. Whether for securely clamping the guide rails, for securing workpieces on the multifunction table MFT or the mobile workshop, for safely attaching sections on semi-stationary saws like the CS S50/70 or the KS/KSC 60, and much more, they provide the necessary support everywhere.
5. Festool Serre-joints MFT-HZ 80
Easy and one-handed clamping and releasing of the material due to ergonomic lever. Round and flat workpieces are clamped securely due to the vertical fixation on the MFT/3. Compatible with the MFT clamping system: MFT/3 and MW 1000. The MFT lever clamp offers workpieces a secure hold without slipping. Compatibility with the MFT hole means it can be easily attached to a multifunction table or the mobile workshop. With the clamping lever, clamping and releasing can be done quickly and comfortably with just one hand...
6. Festool Quick release FS-RAPID/L
The FS-RAPID/L quick clamp is specially designed for use with the SSU 200 and IS 330 reciprocating saws due to its swivel range to the left. Can also be used when clamps cannot be used, for example with thick insulation packages. Saves time by fixing very quickly with only one handle. No running around the workpiece to loosen or tighten clamps. Soft rubber contact points to protect the workpiece and prevent slipping. Can be used in all Festool guide rails in the clamp groove. Clamping force of the clamping screws can be readjusted. With the help of the FS-Rapid quick clamp, the guide rail can be fixed to the workpiece via lateral clamping. This is not only very quick, but also makes it possible to clamp the rail on workpieces where no clamp can be used. Clamping jaws, fixed jaws.
7. Festool Klemme KL-KS 120
Safe and precise work is possible because workpieces do not slip. The clamp is included with the KS 120 and KS 88. Clamping the workpieces from both the right and left is possible. It is used for securely fixing the workpieces. The sturdy clamp is easy to use and very simple to attach to the Kapex 120 and Kapex 88.
8. Festool Screw clamp FSZ 120
For secure fixation of the guide rail, it is inserted into the lower groove. Secure fixation with the MFT 3. The shape of the clamping bracket is tailored to the groove of the guide rails and the profiles of the MFT and the Precisio.
9. Festool Quick release FS-RAPID/R
With the quick clamp FS-Rapid, the guide rail can be fixed to the workpiece using a side clamping mechanism. This is done with a single hand movement, which not only makes it very fast but also allows the rail to be secured on workpieces where clamps cannot be used. It saves time by enabling very quick fixation with just one hand movement. There is no need to walk around the workpiece to loosen or tighten clamps. Soft rubber contact points ensure protection for the workpiece and prevent slipping. The quick clamp can be used in all Festool guide rails in the clamping groove. The clamping force of the clamping screws can be adjusted. It can also be used when clamps cannot be employed, for example, when cutting apart carcasses. Ideal for clamping and positioning the FS, FS/2, and FS/2-KP guide rails.
10. Festool Additional clamp MFT/3-ZK
No slipping or adjustment of the stop rail due to additional clamping. Tool-free mounting in the V-groove of the MFT via rotary knobs. Flexible mounting as the clamping jaw can be rotated. Perfectly matched to the profile of the stop rail and the V-groove of the MFT. The additional clamp additionally fixes the stop rail of the angle stop on the MFT/3, thus enabling perfect alignment of the angle and preventing accidental adjustment.
