Niedax Hanging Arm HU 5050/200

Manufacturer: Niedax
Designation: Hanging Arm
Type: HU 5050/200
Length: 205 mm
Profile Width: 50 mm
Profile Height: 50 mm
Design: U-Profile
Load Capacity: 4 kN
Suitable for Function Maintenance: yes
Material: Steel
Stainless Steel, Pickled: no
Material Quality: other
Surface Protection: Hot-dip galvanized
Operating Temperature: -20 to 120 °C
Weight: 0.93082 kg

Niedax Hanging Arm HU 5050/200: additional details
Hanging arm, 3-sided continuously perforated U-profile with welded head plate, System HU 5050, for brackets for single, double, and triple-sided installation. To prevent deformation of the hanging arm profile during the installation of brackets, the hanging arm spacer profile HDS 50.50 F with hexagon screw must be considered for static reasons. When securing the bracket to the hanging arm profile on one side, the closed side of the bracket should preferably be aligned with the profile web of the hanging arm. For static reasons and to allow for easy placement of the protective cap, the bracket must be mounted at a distance of 50 mm (from the bottom edge of the bracket to the end of the hanging arm) above the end of the hanging arm.

For use in function maintenance or for ceilings with fire protection requirements (Sample Guidelines for Cable Management Systems MLAR 2/2015), please observe additional regulations! Attention: Limited space for cable tray installation (length of the hanging arm minus the height of the bracket)! VDE certified!

For brackets: KTAL, KTAM, KTA 100 - 600 (Function Maintenance/MLAR)
Dimensions (approximate):
Head Plate L x W x t: 140 x 80 x 5 mm
Mounting Hole: 13 x 20 mm
Center Distance: 100 mm
U-Profile: 50 x 50 x 50 mm
Material Thickness t: 2.5 mm
Three-sided Profile Perforation, single row: 12 x 30 mm
Center Distance: 50 mm
Total Length L: 205 mm
Material: Steel, hot-dip galvanized according to DIN EN ISO 1461.