Best Thorneco products in the Workshop lighting category
On this page you'll find a ranking of the best Thorneco products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Thorneco 96635654
Thorn eco escape route luminaire NINA 30M SE#96635654
Manufacturer: Thorn eco
Designation: Escape route luminaire
Type: NINA 30M SE#96635654
Mounting type: Surface-mounted/recessed
Illuminant: LED not replaceable
With illuminant: Yes
Suitable for number of illuminants: 1
Socket: Without
Housing material: Plastic
Housing colour: White
Cover material: Plastic opal
Voltage type: AC
Rated voltage: 220-240 V
Replaceable control gear: Yes
Rated service life L70/B50 at 25 °C: 74,000 h
Luminous flux reduction with average service life 50,000 h at 25 °C
Ambient temperature: 80 %
Degree of protection (IP): IP40
Impact resistance: IK04
Protection class: II
Luminaire with limited surface temperature "D mark": No
Rated ambient temperature according to IEC 62722-2-1: 0-40 °C
Max. system power: 5.1 W
System power: 5.1 W
Rated luminous flux according to IEC 62722-2-1: 70 lm
Colour temperature: 5700 K
Power factor: 0.5
Width: 45 mm
Height/depth: 231 mm
Length: 343 mm
Thorn eco escape route luminaire NINA 30M SE#96635654: more details
LED escape route luminaire with local battery supply for 3h emergency lighting operation, manual and self-test (AutoTest) function. Visibility up to 30m. Complies with DIN EN 1838 and DIN 4844-1. Easy installation thanks to universal mounting bracket for ceiling, wall, and 90° mounting. Includes 4 pictograms (up, down, arrow, green). Indication of luminaire status via status LED. Service life: 50,000 h at L80. Protection class: IP40. Impact resistance: IK03. Continuous or standby mode. Rechargeable battery: LiFePO4 3.2V 1.5Ah. Initial charge time: 24 hours. Dimensions: 343 x 45 x 231 mm, weight: 0.98 kg. For installation in Germany, observe DIN 0108 T100-1.
2. Thorneco Boris Flex
IP65 LED high-bay luminaire for single-point suspension. Efficient lens technology with glare limitation and a beam angle of 90° for homogeneous illumination. The housing design allows airflow cooling of the luminaire, ensuring optimum performance in industrial environments. Total luminous flux: 30,000 lm, luminaire output: 195 W, luminaire luminous efficacy: 154 lm/W, correlated colour temperature (CCT) 4000K, service life: 50,000 hours at L80, colour rendering: CRI > 80, chromaticity coordinate tolerance (initial MacAdam): 5. Including tool-free connector, eyebolt, and quick-release chain lock. Voltage switchable driver: 100-277V AC 50/60Hz. Overvoltage protection up to 4kV. Pre-wired with mains cable (15 cm). Accessories: Plug and Play emergency lighting set for 3 hours emergency lighting operation, mounting bracket, MWS sensor, PIR sensor, and remote sensor for commissioning. Lumen package adjustable on site in 3 steps (FLEX1: 30,000 lm (195W), FLEX2: 25,000 lm (160W), FLEX3: 20,000 lm (130W). Dimensions: Diameter 380 x 130 mm, weight: 3.13 kg.
3. Thorneco 96635656
Thorneco emergency light SAM 20M SE #96635656
Manufacturer: Thorneco
Designation: Emergency light
Type: SAM 20M SE #96635656
Mounting type: Wall-mounted/ceiling-mounted
With pictogram: Yes
Monitoring device: Automatic self-test
Battery type: Lithium-ion
Illuminant: LED (not replaceable)
With illuminant: Yes
Rated voltage: 220-240 V
Control gear: LED control gear current-controlled
Protection class (IP): IP65
Impact resistance: IK08
Max. system power: 4.8 W
Rated luminous flux to IEC 62722-2-1: 269 lm
Colour temperature: 5700 K
Detection range: 20 m
Rated operating time: 3 h
Width: 110 mm
Height/depth: 70 mm
Length: 255 mm
Thorneco emergency light SAM 20M SE #96635656 offers an LED emergency wall and ceiling light and escape route light with local battery supply for 3 hours of emergency light operation, featuring manual and self-test (AutoTest) function. Visibility is up to 20 m. It complies with DIN EN 1838 and DIN 4844-1, including 4 pictograms (left, right, arrow, green). The flexible installation allows for variable cable entry openings. The luminaire status is indicated via a status LED. Service life is 50,000 hours at L80. It has an IP65 rating and impact resistance of IK08. The light can operate in continuous or standby mode. The rechargeable battery is LiFePO4 3.2V 1.5Ah with an initial charge time of 24 hours. Dimensions are 255 x 110 x 70 mm, and the weight is 0.6 kg. For installation in Germany, observe DIN 0108 T100-1.
