Best selling RC receivers from Jeti
On this page you'll find a ranking of the best Jeti products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Jeti Receiver Rex 6 Assist duplex
The JETI DUPLEX 2.4EX Receiver REX 6 Assist is a highly advanced RC receiver specifically designed for fixed-wing models and multicopters. With an integrated ASSIST stabilization system, this receiver offers improved control and stability during flight. The built-in telemetry allows for monitoring of angles on three axes, G-Force, and temperature, enabling precise analysis of flight conditions. The receiver supports various protocols such as PPM, EXBUS, and EX, and can output a stabilized EX Bus signal for CentralBoxes. Thanks to the 32-bit processor and the programmable functions of the slots, the REX 6 Assist is both powerful and flexible in application. Programming is conveniently done via the JETIBOX or wirelessly through the Duplex DC/DS transmitters, further simplifying operation.
- Integrated ASSIST stabilization system with various modes
- Versatile telemetry functions for monitoring flight parameters
- Supports multiple protocols for flexible integration
- Programming possible via JETIBOX and wirelessly
- Compact design with full functionality.
2. Jeti Receiver REX 10 duplex
The new receiver generation features an integrated expander for up to three sensors. Supported protocols include PPM, EXBUS, EX, and UDI. The programmable functions of the slots allow for direct inputs. With compact dimensions and a 32-bit processor, the device offers full range. It is programmable via the JETIBOX and wirelessly through the Duplex DC/DS transmitters. An internal memory enables data logging and control signals (evaluation in preparation). The device is also ideal in combination with external servo switches when connected via Jeti Ex Bus, as well as additional sensors. The required .bin files for configuration via the device overview of the DC/DS transmitters can be found in the download area.
3. Jeti Receiver REX 6 duplex
6 channel full-range receiver compatible with JETI EX and EX Bus protocols. Supports telemetry functions.
Additional features:
- PPM input
- PPM output
- Integrated expander for EX and EX Bus devices
- UDI digital output
JETI Duplex receivers are designated for use with the DC/DS transmitters or the JETI transmitter modules in the 2.4 GHz frequency band.
The receivers support online updates, allowing users to install the latest software versions. From the very beginning, bidirectional transmission has been a distinctive feature of the Duplex system, handling telemetry data and ensuring secure transmission safety between the transmitter and receiver.
The Duplex EX telemetry system uses an open protocol, providing compatibility with a large number of telemetry sensors from both JETI model and third-party producers. For displaying telemetry data, you can use specially designed equipment like the JETIBOX Profi and DC/DS transmitters, or display the data on PCs.
The REX receivers are fully compatible with the previous generation of the Duplex equipment.
4. Jeti Receiver REX 7 duplex
7 channel full-range receiver compatible with JETI EX and EX Bus protocols. Supports telemetry functions.
Additional features:
- PPM input
- PPM output
- Integrated expander for EX and EX Bus devices
- UDI digital output
JETI Duplex receivers are designated for use with the DC/DS transmitters or the JETI transmitter modules in the 2.4 GHz frequency band.
The receivers support online updates so that everyone is able to install the latest software versions. From the very beginning, bidirectional transmission has been a distinctive feature of the Duplex system; this not only handles telemetry data but also helps to ensure secure primary transmission safety between the transmitter and receiver.
The Duplex EX telemetry system uses an open protocol. This gives the advantage of compatibility with a large number of telemetry sensors from both JETI model and third-party producers. For the display of telemetry data, you can use purposely designed equipment like the JETIBOX profi and DC/DS transmitters or you can display the data on PCs.
The REX receivers are fully compatible with the previous generation of the Duplex equipment.
5. Jeti Receiver DUPLEX 2.4EX R4H
The lowest priced receiver of the JETI Duplex series with full range. Standard with 4 servo channels. By firmware change, it can also function as a 3-channel receiver with Jeti Basic telemetry (not EX). Small design with full housing, manufactured exclusively for Hacker Motor.
6. Jeti Receiver Rex 12 Assist duplex
Integrated telemetry: rotation angle on three axes, G-Force, temperature. Integrated ASSIST stabilization system with stabilization, heading hold, and trainer mode for surface models and multicopters. Can output stabilized EX bus signal for CentralBoxes. Integrated expander for up to three sensors. Supported protocols: PPM, EXBUS, EX, and more. Programmable functions of the slots with support for direct inputs. Compact dimensions and a 32-bit processor. Full range, programmable via the device overview of the duplex DC/DS transmitters and from the JETI studio via PC. Antennas with blocking pot for increasing input sensitivity. The device files required for setting from the transmitter can be found under the Downloads tab. Please unpack these files and copy them into the Device folder of the station memory.
7. Jeti Receiver REX 12 duplex
Duplex 2.4EX Receiver REX 12
- The new generation of receivers
- Integrated expander for up to 3 sensors
- Supported protocols: PPM, EXBUS, EX, UDI
- Programmable functions for the slots
- Supports direct inputs
- Compact dimensions
- 32-bit processor
- Full range
- Programmable via the JETIBOX and wirelessly through the Duplex DC/DS transmitters
- Ideal for use in combination with external "servo switches" when connected via Jeti Ex Bus and additional sensors
- Antennas with "blocking pot" to increase input sensitivity
- Power supply via MPX connector (EPC); if the power supply is provided through the servo connectors, cover the EPC connector
- JETI-Hacker Ditex servo telemetry possible with REX receivers
- S.Bus output available from FW 1.13.
8. Jeti Receiver REX 7 A40 duplex
Duplex 2.4EX Receiver REX 7 A40 with 400 mm long antennas!
Features:
- The new generation of receivers
- Integrated expander for up to 3 sensors
- Supported protocols: PPM, EXBUS, EX, UDI
- Programmable functions for the slots
- Support for direct inputs
- Compact dimensions
- 32-bit processor
- Full range
- Programmable via the JETIBOX and wirelessly through the Duplex DC/DS transmitters
- Internal memory for data logging and control signals (evaluation in preparation)
- Ideal also in combination with external "servo switches" when connected via Jeti Ex Bus and additional sensors
Additional technical data:
- Telemetry: Yes
- Temperature range [°C]: -10 ... 85
- Compatible protocols: DUPLEX 2.4GHz EX, EX Bus, UDI
- Antenna length [mm]: 2 x 400
- Voltage range [V]: 3.2 - 8.4
- Current consumption [mA]: 30
- Satellite receiver connection: Yes
- Output power [dBm]: 15
- Reception sensitivity [dBm]: -106.
9. Jeti Receiver DUPLEX 2.4EX R7 nano
The Duplex R7 nano EX receiver combines many servo outputs with extremely small dimensions. The R7 nano EX is perfect for use in small and very lightweight models and is equipped with a 32 mm antenna. The R7 nano EX is the lightest receiver in the Duplex system, weighing just 1 gram (2 g with heat shrink). No connectors for the servos are provided; all servo cables can be soldered directly onto the circuit board. This saves weight and eliminates unnecessary connectors when extreme lightweight construction is a priority.
Features:
- Telemetry: Yes
- Operating temperature [°C]: -10 to 85
- Compatible protocols: Duplex 2.4 GHz EX, EX Bus
- Antenna length [mm]: 1 x 32
- Supply voltage [V]: 3.2 to 8.4
- Average current [mA]: 30
- Satellite receiver support: No
- Output power [dBm]: 6
- Sensitivity [dBm]: -98
- Possible serial output: PPM pos./neg., EX Bus, UDI, JETI Box.
10. Jeti Receiver Rex 3 A20 duplex
With 200mm long antennas, this product features antennas with a blocking pot for maximum input sensitivity. It is ideal for use in combination with external servo switches when connected via Jeti Ex Bus and additional sensors. This new receiver generation includes an integrated expander for multiple sensors and supports protocols such as PPM, EXBUS, EX, and UDI. It offers programmable functions for the slots and supports direct inputs. The compact dimensions house a 32-bit processor, ensuring full range capabilities. Programming can be done via the JETIBOX and wirelessly through the Duplex DC/DS transmitters. Additionally, it has internal memory for data logging and control signals, with evaluation currently in preparation.
