Best selling Screws from Spax

This page always stays fresh and updates automatically.

1. Spax A2 Senkmultikopf T-Star Plus T20 Teilgewinde

The SPAX typical drive T-STAR plus is a so-called internal hexagon. This shape increases the contact surface of our T-STAR plus, allowing the T-STAR plus bits to fit optimally in the screw head. The best possible power transfer from the screwdriver to the screw through T-STAR plus enables quick work, and it is significantly more efficient than all other drives. The countersunk head (or flat countersunk head) mills a recess into the wood with its polygonal underside ("pockets") and can therefore be sunk without additional countersinking of the screw hole. The countersunk head sits flush with the surface. The screws with partial thread are excellent for fastening thin components such as wood-based panels, boards, or floorboards to thicker components like beams or posts. The short thread screws into the thick component, while the unthreaded shaft remains in the attachment component. This creates maximum clamping pressure between the two. The unthreaded part should be at least the thickness of the attachment component. The term 4CUT refers to the square shape of the screw tip. These edges displace the wood fibers during insertion and create space for the screw's core diameter. The spreading pressure exerted by the core in the wood is thus reduced, preventing the wood from splitting near the edges. The required torque of the cordless screwdriver is also reduced, as the core of the screw does not have to "squeeze" into the wood. The abbreviation A2 in our stainless steel screws comes from the steel alloy. Screws made of stainless steel A2 offer high protection against corrosion and medium strengths. Their resistance to seawater and acids is low. Therefore, they are used for outdoor applications in areas far from the coast.

Screws

EUR31,63 EUR0,31/1pcs.

Spax A2 Senkmultikopf T-Star Plus T20 Teilgewinde

100 Screws per piece, 5 x 90 mm

2. Spax A2 Senkmultikopf T-Star Plus T20 Vollgewinde

The SPAX typical drive T-STAR plus is a so-called internal hexagon. This shape increases the contact area of our T-STAR plus, allowing the T-STAR plus bits to fit optimally in the screw head. The best possible power transfer from the screwdriver to the screw through T-STAR plus enables quick work and is significantly more efficient than all other drives. The countersunk head (or flat countersunk head) carves a recess into the wood with its polygonal underside ("pockets"), allowing it to be sunk without additional countersinking of the screw hole. The countersunk head sits flush with the surface. Unlike partially threaded screws, the full thread extends over the entire length of the screw. The more threads a screw has, the greater the tensile and compressive forces that can be transferred from the screw to the wood. Our full-thread screws are primarily used for high-load wooden connections. The term 4CUT refers to the square shape of the screw tip. These edges displace the wood fibers during insertion and create space for the screw's core diameter. This reduces the spreading pressure exerted by the core in the wood and prevents splitting of the wood near the edges. The required torque of the cordless screwdriver is also reduced, as the core of the screw does not have to "squeeze" into the wood. The abbreviation A2 in our stainless steel screws comes from the alloy of the steel. Screws made of stainless steel A2 offer high protection against corrosion and medium strengths. Their resistance to seawater and acids is low. Therefore, they are used in outdoor applications in areas far from the coast.

Screws

EUR16,87 EUR0,08/1pcs.

Spax A2 Senkmultikopf T-Star Plus T20 Vollgewinde

200 Screws per piece, 4 x 20 mm

3. Spax A2 Tellerkopf T-Star Plus T30 Teilgewinde

The SPAX-typical T-STAR plus drive is a so-called hexalobular socket. This shape increases the contact surface of our T-STAR plus and the T-STAR plus bits sit perfectly in the screw head. The best possible power transmission from screwdriver to screw thanks to T-STAR plus enables you to work quickly and much more efficiently than with all other drives.

The screws with partial thread are ideal for fastening thin components such as wood-based panels, boards or planks to thicker components such as squared timber or beams. The short thread screws into the thick component, while the unthreaded shank remains in the attachment. This creates the maximum contact pressure between the two. The non-threaded part should be at least as thick as the attachment part.

The term 4CUT stands for the square shape of the screw tip. These edges displace the wood fibres during screwing in and create space for the core diameter of the screw. The expansion pressure exerted by the core in the wood is thus reduced and splitting of the wood near the edge is prevented. The required torque of the cordless screwdriver is also reduced, as the core of the screw does not have to "squeeze" into the wood.

The abbreviation A2 for our stainless steel screws comes from the alloy of the steel. A2 stainless steel screws offer high protection against corrosion and medium strength. Their resistance to seawater and acids is low. They are therefore used outdoors in areas far from the coast.

Screws

EUR81,98 EUR0,82/1pcs.

Spax A2 Tellerkopf T-Star Plus T30 Teilgewinde

100 Screws per piece, 6 x 100 mm

4. Spax Terrasse A4 Zylinderkopf T-Star Plus T25 Fixiergewinde Cut

The SPAX typical drive T-STAR plus is a so-called internal hexagon. This shape increases the contact area of our T-STAR plus, allowing the T-STAR plus bits to fit optimally in the screw head. The best possible power transfer from the driver to the screw through T-STAR plus enables quick work, and it is significantly more efficient than all other drives.

The screws with partial threads are excellent for fastening thin components such as particle boards, planks, or floorboards to thicker components like beams or joists. The short thread screws into the thick component, while the unthreaded shaft remains in the attachment. This creates maximum clamping pressure between the two. The unthreaded part should be at least as thick as the attachment.

The term 4CUT refers to the square shape of the screw tip. These edges displace the wood fibers during insertion and create space for the screw's core diameter. This reduces the spreading pressure that the core exerts on the wood and prevents splitting near the edges. The necessary torque of the cordless screwdriver is also reduced, as the screw's core does not have to "squeeze" into the wood.

With WIROX, SPAX has developed a coating that is far superior to galvanization in terms of corrosion protection. WIROX does not use chromium (VI), and the screws remain just as durable after years in non-directly weather-exposed outdoor areas, while also being environmentally friendly. WIROX screws are the first choice for all open structures without direct weather exposure, such as carports or pergolas; for direct weather exposure, such as terraces, we recommend our screws in stainless steel.

Screws

EUR42,19 EUR0,42/1pcs.

Spax Terrasse A4 Zylinderkopf T-Star Plus T25 Fixiergewinde Cut

100 Screws per piece, 6 x 60 mm

5. Spax A2 Senkmultikopf T-Star Plus T15 Teilgewinde

The SPAX-typical T-STAR plus drive is a so-called hexalobular socket. This shape increases the contact surface of our T-STAR plus and the T-STAR plus bits sit perfectly in the screw head. The best possible power transmission from screwdriver to screw thanks to T-STAR plus enables you to work quickly and much more efficiently than with all other drives. The countersunk head (or flat countersunk head) mills a recess into the wood with its polygonal underside ("pockets") and can therefore be countersunk without additional countersinking of the screw hole. The countersunk head is flush with the surface. The partially threaded screws are ideal for fastening thin components such as wood-based panels, boards or planks to thicker components such as squared timber or beams. The short thread screws into the thick component, while the unthreaded shank remains in the attachment. This creates the maximum contact pressure between the two. The non-threaded part should be at least as thick as the attachment. The term 4CUT stands for the square shape of the screw tip. These edges displace the wood fibres during screwing in and create space for the core diameter of the screw. The expansion pressure exerted by the core in the wood is thus reduced and splitting of the wood near the edge is prevented. The required torque of the cordless screwdriver is also reduced, as the core of the screw does not have to "squeeze" into the wood. The abbreviation A2 for our stainless steel screws comes from the alloy of the steel. A2 stainless steel screws offer high protection against corrosion and medium strength. Their resistance to seawater and acids is low. They are therefore used outdoors in areas far from the coast.

Screws

EUR17,22 EUR0,08/1pcs.

Spax A2 Senkmultikopf T-Star Plus T15 Teilgewinde

200 Screws per piece, 3.5 x 40 mm

6. Spax T-Loc T-Star Plus

This SPAX Box Systainer³ T-Loc furniture construction holds a complete screw set with 2,900 screws in 12 dimensions. The modular Systainers are also known as storage boxes for power tools, which can be easily connected to each other. This SPAX Box Systainer thus becomes an integral part of your toolboxes, you always have everything you need with you and perfectly organised. In addition to the screws with T-STAR plus, countersunk and flat backing head, the kit also includes a five-strong T-STAR plus T20 bit team. Spax carcase connector screws with flat backing plate head and partial thread are nickel-plated and are ideal for carcase connections in furniture construction. SPAX back panel screws with flat back panel head in WIROX with full thread offer increased head pull-through forces when screwing together shelf and cupboard back panels without damaging the material. For you, this means: maximum organisation in the Systainer, tools and screws become a compact combination for the construction site.

Spax T-Loc T-Star Plus (1 Screw per piece, 3 x 30 mm, 3.5 x 16 mm, 3.5 x 20 mm, 3.5 x 30 mm, 4 x 16 mm, 4 x 20 mm, 4 x 25 mm, 4 x 30 mm, 4 x 40 mm)

Screws

EUR160,77 EUR160,77/1pcs.

Spax T-Loc T-Star Plus

1 Screw per piece, 3 x 30 mm, 3.5 x 16 mm, 3.5 x 20 mm, 3.5 x 30 mm, 4 x 16 mm, 4 x 20 mm, 4 x 25 mm, 4 x 30 mm, 4 x 40 mm

7. Spax A2 Tellerkopf T-Star Plus T40 Teilgewinde 4cut

The SPAX typical drive T-STAR plus is a so-called internal hexagon. This shape increases the contact surface of our T-STAR plus, allowing the T-STAR plus bits to fit optimally in the screw head. The best possible power transfer from the screwdriver to the screw through T-STAR plus enables quick work, significantly more efficient than with any other drives. The screws with partial thread are excellently suited for fastening thin components such as wood-based panels, boards, or floorboards to thicker components like beams or posts. The short thread screws into the thick component, while the unthreaded shaft remains in the attachment. This creates maximum clamping pressure between the two. The unthreaded part should be at least equal to the thickness of the attachment. The term 4CUT refers to the square shaping of the screw tip. These edges displace the wood fibers during insertion and create space for the screw's core diameter. The spreading pressure exerted by the core in the wood is thus reduced, preventing the wood from splitting near the edges. The required torque of the cordless screwdriver is also reduced, as the core of the screw does not have to "squeeze" into the wood. The abbreviation A2 in our stainless steel screws comes from the steel alloy. Screws made of stainless steel A2 offer high protection against corrosion and medium strengths. Their resistance to seawater and acids is low. Therefore, they are used for outdoor applications in areas far from the coast.

Screws

EUR127,05 EUR2,54/1pcs.

Spax A2 Tellerkopf T-Star Plus T40 Teilgewinde 4cut

50 Screws per piece, 8 x 180 mm

8. Spax Fassadenschraube A2 Linsensenkkopf 8mm Fraesrippen T-Star Plus T20 Fixiergewinde 4cut

Article 89019 A 2 SPAX Facade fixing thread SPAX Facade screws with raised countersunk head - point - T-STAR - Dimension: 4.5 x 70/31 -T PU=S (100 pcs.) Further technical features: - Surface: Fixing thread - Design: SPAX Facade - Group code 89019.920- Standard type REYHER-Article 89019- Product type designation SPAX Facade screws with raised countersunk head, 4CUT tip, fixing thread, T-STAR plus

Content quantity: 100 pieces per carton.

Screws

EUR34,67 EUR0,35/1pcs.

Spax Fassadenschraube A2 Linsensenkkopf 8mm Fraesrippen T-Star Plus T20 Fixiergewinde 4cut

100 Screws per piece, 4.5 x 70 mm

9. Spax Senkkopf T-Star Plus T15 Teilgewinde Cut Wirox

The most popular wood-based panels in furniture construction are the so-called MDF panels. MDF stands for medium-density fibreboard, i.e. it is a very fine-pored and homogeneous furniture board whose edges can be screwed and nailed, unlike chipboard or coarse chipboard. However, MDF boards tend to bulge or split at the board edges if the edges are not pre-drilled. We have developed SPAX-M to prevent precisely this: The combination of the CUT tip, which virtually drills the screw hole itself, the razor-sharp wave profile and the small 75° milling head for flush countersinking of the screw ensures that you can screw your MDF components together without any problems. However, we recommend maintaining an edge distance of at least 25 mm from the edge of the board, even with the SPAX-M. For you, this means: secure edge screwing, no splitting of the board edges.

Screws

EUR21,19 EUR0,11/1pcs.

Spax Senkkopf T-Star Plus T15 Teilgewinde Cut Wirox

200 Screws per piece, 3.5 x 50 mm

10. Spax CS PZ 3,5X35 YELLOX 50 PCS

The CS PZ 3.5X35 YELLOX screw hook from Spax is a high-quality connection solution specifically designed for use with wood. Made from robust steel and coated with zinc, this screw hook not only offers high strength but also provides some protection against corrosion. With a length of 35 mm and a thread diameter of 3.5 mm, it is versatile and ideal for various applications in timber construction. The Pozidriv cross-slot drive type allows for precise and secure handling, while the flat head design ensures flush mounting. The packaging unit contains 50 pieces, making it an efficient solution for larger projects.

- Made from high-quality steel with a zinc coating for corrosion protection
- Pozidriv cross-slot drive type for precise handling
- Flat head design for flush mounting.